Yamaha YV-500E 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Yamaha YV-500E에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YV-500E 14 페이지. Vibraphone, metallophone
Yamaha YV-500E에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지), 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (17 페이지)

페이지 인쇄

/ ASSEMBLY

10.

Fan Side

Pulley

11.

Round Belt (Fan Belt)

* In case the belt is misplaced or worn, the following spare part may be ordered:

Floor

10.

Set the synchro belts (fan belts)*.

First, wrap the synchro belt around the driver

pulley and then carefully slide it over the fan

side pulley.

* Note For Service Personnel

If the belt cannot be mounted because the dis-

tance between pulleys is too wide, or the belt slips

due to a too narrow pulley distance, loosen the

two driver positioning screws (see illustration be-

low) to adjust the pulley distance (belt tension).

Tighten the screws securely after adjustment.

Synchro Belt (Fan Belt)

Pulley

11.

Adjust the pedal stroke.

Loosen the center rod fixing bolts to adjust the

protruding length of the center rod to the desired

pedal stroke, and retighten the bolts. The recom-

mended stroke (distance between pedal and floor)

is 9/16" to 13/16" (1.5 to 2 cm).

Pedal

Driver Side

Driver Positioning

Screws