Yamaha Arius YDP-C71 소유자 매뉴얼 - 페이지 26

{카테고리_이름} Yamaha Arius YDP-C71에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Arius YDP-C71 38 페이지. Owner's manual
Yamaha Arius YDP-C71에 대해서도 마찬가지입니다: 참조 매뉴얼 (6 페이지), 빠른 작동 매뉴얼 (2 페이지), 운영 매뉴얼 (13 페이지)

페이지 인쇄

Advanced Functions

MIDI Functions

Lowest key

MIDI Transmit/Receive

Channel

When connecting MIDI instruments, make sure to match

the MIDI channels on the instruments. If the Receive

Channel is set to "4" on the external MIDI instrument, for

example, you should set the Transmit Channel of this

instrument to "4."

To set the Transmit Channel:

While holding down [DEMO/SONG] and [PIANO/VOICE]

simultaneously, press one of the C1-E2 keys.

To set the Receive Channel:

While holding down [DEMO/SONG] and [PIANO/VOICE]

simultaneously, press one of the C4-F5 keys.

NOTE

Default settings:

• Transmit Channel

Voice 1: Ch1

• Receive Channel

All (Ch1 - Ch16; all channels)

About the value

• When the Transmit Channel is set to off, no MIDI data is

transmitted even if you play the keyboard.

• When the Receive Channel is set to all, this instrument

receives MIDI data over all channels, such as with

multi-channel SMF data.

• When the Receive Channel is set to 1+2, this

instrument receives MIDI data over channels 1 and 2,

such as with Piano Song data.

Transmit Channel in Dual

While the Voice 1 Part is transmitted over the specified

Channel, the Voice 2 Part is transmitted over the next

highest Channel.

Local Control On/Off

Normally, playing the keyboard will control the internal tone

generator. This situation is "Local Control On." If you want

to use the keyboard only for controlling an external MIDI

instrument, turn off Local Control. With this setting, no

sound of this instrument will be produced even if you play

the keyboard.

YDP-C71 Owner's Manual

D 2

2 4

14 16

1 3 5 6

8 10 12

Setting the

Off

Transmit Channel

–

(C1

D 2)

Turning the Local

2 4

7 9

1 3 5 6 8 10 12

Setting the

Receive Channel

–

(C4

F5)

To turn the Local Control On or Off:

While holding down [DEMO/SONG] and [PIANO/VOICE]

simultaneously, press the C6 key once to change the

setting.

Program Change On/Off

Normally on this instrument, selecting a Voice on the panel

transmits the corresponding Program Change over the

specified Transmit Channel. Likewise, receiving a Program

Change message changes the Voice number according to

the Receive Channel setting, without affecting the panel

settings. This status can be changed via the following

operation.

To turn Program Change On or Off

While holding down [DEMO/SONG] and [PIANO/VOICE]

simultaneously, press the C#6 key once to change the

setting.

NOTE

For information on the Program Change number for each

Voice, refer to the "MIDI Reference."

Control Change On/Off

Normally on this instrument, pressing a Pedal or setting the

Reverb Depth transmits the corresponding Control Change

over the specified Transmit Channel. Likewise, receiving

the Control Change message will affect the performance

expression according to the Receive Channel setting,

without affecting the panel settings. This status can be

changed via the following operation.

To turn Control Change On or Off

While holding down [DEMO/SONG] and [PIANO/VOICE]

simultaneously, press the D6 key repeatedly.

NOTE

For information on the Control Change messages which

can be handled in this instrument, refer to the "MIDI

Reference."

Turning the Program

Change On/Off

(C 6)

Turning the Control

Control On/Off

Change On/Off

(C6)

(D6)

14 16

1 1+2

Highest key

All