Yamaha Disklavier E3 기능 설명서 - 페이지 5

{카테고리_이름} Yamaha Disklavier E3에 대한 기능 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Disklavier E3 13 페이지. Music equipment
Yamaha Disklavier E3에 대해서도 마찬가지입니다: 빠른 작동 매뉴얼 (2 페이지), 수동 재생 (38 페이지), 데이터 목록 (16 페이지), 업데이트 매뉴얼 (5 페이지), 빠른 참조 매뉴얼 (10 페이지), 업데이트 매뉴얼 (16 페이지), 업데이트 매뉴얼 (45 페이지), 사용자 설명서 (22 페이지)

Enhancing the Disklavier by Hooking Up

Other Devices

[SETUP]

"AudioI/O"

You can select how the Disklavier handles incoming/outgoing audio

signals.

The following options are available in Version 3.10.

A-MIDI IN Offset

In some video synchronized playback situations, the video may appear a

little bit later than the piano playing (via analog MIDI). To eliminate this

delay, you can adjust the offset time that leads the actual playback of the

piano. A delay is applied to the incoming analog MIDI signal. The offset

time can be set in a range of –500 ms to 0 ms. Decrease this value to delay

the piano playing, and increase to advance the piano playing.

OUTPUT Offset

For some speakers or digital amplifiers, the audio from the Disklavier may

be output a little bit later than the acoustic piano playing. To eliminate this

delay, you can adjust the offset time for the sound output. This setting is

applied to the outgoing audio signal from the OUTPUT jacks and OMNI

(SYNC) OUT jacks. Decrease this value to advance the sound output. The

offset time can be set in a range of –100 ms to 0 ms. Decrease this value to

delay the piano playing, and increase to advance the piano playing.

Press [SETUP] on the remote control.

The setup menu screen appears.

English

=SETUP MENU=

(1/3)

*TimerPlay

*AudioI/O

*MIDI

*M-Tune

Continued on next page