Yamaha MOTIF ES6 소프트웨어 설명서 - 페이지 36
{카테고리_이름} Yamaha MOTIF ES6에 대한 소프트웨어 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha MOTIF ES6 36 페이지. Voice editor
Yamaha MOTIF ES6에 대해서도 마찬가지입니다: 소프트웨어 설치 매뉴얼 (35 페이지), 소프트웨어 설명서 (33 페이지)
![Yamaha MOTIF ES6 소프트웨어 설명서](/uploads/products/server2/7069333/7069333.png)
Troubleshooting
If you encounter problems such as no sound output or abnormal behavior, verify the connections
before checking the following.
Sound does not change when using the knobs or sliders.
•
Are the MIDI Out port and Device Number set correctly in the "Setup dialog"?
Bulk data is not transmitted.
•
Are the MIDI Out port and Device Number set correctly in the "Setup dialog"?
•
Is the Dump Interval in the "Setup dialog" too short? Make sure to adjust the Dump Interval.
Bulk data is not received. Time-out errors are frequent.
•
Are the MIDI Out port and Device number set correctly in the "Setup dialog"?
•
Depending on the host application, you may need to turn MIDI Thru setting off in the host
application.
•
When running the Multi Part Editor as an SQ01 plug-in, reduce the buffer size in SQ01
under [Setup] menu → [MIDI] → [System Exclusive] → Receive Buffer Size.
The MIDI In/Out port is not available in the "Setup dialog".
•
Only MIDI Ports selected in the host applications MIDI Setup can be selected in the "Setup
dialog". Confirm the ports selected in the host application.
Remote operation functions don't work.
•
Is the remote output port set correctly in the "Setup dialog"?
•
Is the remote operation device configured correctly? When using the 01X as a remote oper-
ation device, make sure the REMOTE and MIDI buttons are on.
Parts using User Voices do not sound correctly.
•
Has the User Voice data been transmitted to the MOTIF ES6/7/8?
By transmitting the Multi settings, you can play the MOTIF ES6/7/8 with the newly transmit-
ted voice data.
Noise is audible during remote operation
For Windows XP users:
•
The condition may improve if you enable Hyper-Threading in the BIOS settings.
For information on how to enable Hyper-Threading, refer to the owner's manual of your
computer.
(page
36
(page
30)
(page
30)
(page
30)
30)
(page
31)