Yamaha N-100 소유자 매뉴얼 - 페이지 30
{카테고리_이름} Yamaha N-100에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha N-100 42 페이지. Yamaha n-100 music keyboards: quick start
Yamaha N-100에 대해서도 마찬가지입니다: 빠른 작동 매뉴얼 (2 페이지)
페이지 인쇄
Keyboard Stand Assembly
7.
Connect the pedal cord.
Insert the pedal cord plug into the pedal connec-
tor.
8.
Set the adjuster.
Rotate the adjuster until it comes in firm contact
with the floor surface.
After completing the assembly, please check the fol-
lowing.
• Are there any parts left over?
→ Review the assembly procedure and correct any
errors.
• Is the N-100 clear of doors and other movable fix-
tures?
→ Move the N-100 to an appropriate location.
• Does the N-100 make a rattling noise when you
shake it?
→ Tighten all screws.
• Does the pedal box rattle or give way when you step
on the pedals?
→ Turn the adjuster so that it is set firmly against
the floor.
• Are the pedal and power cords inserted securely
into the sockets?
→ Check the connection.
• If the main unit creaks or is otherwise unsteady
when you play on the keyboard, refer to the assem-
bly diagrams and retighten all screws.
30
N-100 Owner's Manual
CAUTION
When moving the instrument after assembly, always
hold the bottom of the main unit.
Do not hold the key cover, and the stepped part on the
front, side or rear of the unit. Improper handling can
result in damage to the instrument or personal injury.
Hold here.
Place the N-100 so that its rear panel is at least 10 cm
away from the wall.
Do not hold here.
Do not
hold here.