Yamaha piaggero NP-11 참조 - 페이지 2

{카테고리_이름} Yamaha piaggero NP-11에 대한 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha piaggero NP-11 7 페이지. Quick operation guide
Yamaha piaggero NP-11에 대해서도 마찬가지입니다: 소유자 매뉴얼 (28 페이지), 빠른 작동 매뉴얼 (2 페이지)

페이지 인쇄

MIDI Functions

You can make detailed adjustments to MIDI settings.

MIDI Transmit/Receive Channel Selection

In any MIDI control setup, the MIDI channels of the transmitting and receiving devices must be matched

for proper data transfer.

This parameter enables you to specify the channel on which the instrument transmits or receives MIDI

data.

Setting the Transmit Channel

While holding down the [DEMO] button, press and hold the [METRONOME ON/OFF] button,

then press one of the C1–E2 keys.

Setting the Receive Channel

While holding down the [DEMO] button, press and hold the [METRONOME ON/OFF] button,

then press one of the C4–F5 keys.

Local Control ON/OFF

"Local Control" refers to the fact that, normally, the keyboard of the instrument controls its internal tone generator, allowing the inter-

nal voices to be played directly from the keyboard. This situation is "Local Control On," since the internal tone generator is controlled

locally by its own keyboard. Local control can be turned OFF, however, so that the the keyboard of the instrument does not play the

internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT terminal when notes are played on the key-

board. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN terminal.

While holding down the [DEMO] button, press and hold the [METRONOME ON/OFF] button,

then press one of the A#5 key. Pressing the A#5 key repeatedly toggles between Local Control On

and Off.

NP-31/NP-11 MIDI Reference

NP-31

NP-11

14 16

5 6 8 10 12 13 15 OFF

Transmit Channel

(C1–E2)

NP-31

NP-11

A#5

14 16

5 6 8 10 12 13 15 1+2 ALL

Receive Channel

(C4–F5)

NOTE

In Dual, Voice 1 data is transmitted on its

specified channel and Voice 2 data is

transmitted on the next greater channel

number relative to the specified channel.

In this case, no data is transmitted if the

transmit channel is set to "OFF."

NOTE

ALL:

"Multi-timbre" Receive. This allows

simultaneous reception of different parts

on all 16 MIDI channels, enabling the

instrument to play multi-channel song

data received from a music computer or

sequencer.

1+2:

"1+2" Receive. This allows simultaneous

reception on channels 1 and 2 only,

enabling the instrument to play 1 and 2

channel song data received from a music

computer or sequencer.

NOTE

Program change and other like channel

messages received will not affect the

panel settings of the instrument or the

notes you play on the keyboard.

NOTE

Data for the demo song and piano preset

songs cannot be transmitted via MIDI.

NOTE

Default setting: ON