Yamaha piaggero NP-31 소유자 매뉴얼 - 페이지 16
{카테고리_이름} Yamaha piaggero NP-31에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha piaggero NP-31 28 페이지. Quick operation guide
Yamaha piaggero NP-31에 대해서도 마찬가지입니다: 참조 (7 페이지), 빠른 작동 매뉴얼 (2 페이지)
페이지 인쇄
Other Settings
Adding Variations to the Sound – Reverb
This control enables you to select four different types of reverb effect that add extra depth and expression to the
sound to create a realistic acoustic ambience.
Key
Reverb Type
C2
Room
C#2
Hall1
D2
Hall2
D#2
Stage
E2
Off
Selecting a Reverb Type
While holding down the [VARIATION] button, press one of the C2 – E2 keys
to select a reverb type (as shown above).
Adjusting Reverb Depth
While holding down the [VARIATION] button, press one of the C1 – A#1 keys
to adjust the reverb depth for the selected Voice.
The depth value increases as you press higher keys.
While holding down the [VARIATION] button, press the B1 key to set the
reverb to the depth most suitable for the selected Voice.
16
NP-31/NP-11 Owner's Manual
Description
This setting adds a continuous reverb effect to the sound, similar to
the acoustic reverberation you would hear in a room.
For a "bigger" reverb sound, use the HALL 1 setting. This effect
simulates the natural reverberation of a small-size concert hall.
For a truly spacious reverb sound, use the HALL 2 setting. This
effect sim-ulates the natural reverberation of a large concert hall.
Simulates the reverb of a stage environment.
No effect is applied.
NP-31
NP-11
C1
C2
E2
NP-31
A#1 (10)
NP-11
C1 (0)
B1
C2
NOTE
The appropriate Reverb Type and Depth
are automatically set when a Voice is
selected.
NOTE
Setting range:
0 (no effect) – 10 (maximum depth)