Yamaha PortaSound PSS-102 소유자 매뉴얼 - 페이지 3
{카테고리_이름} Yamaha PortaSound PSS-102에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha PortaSound PSS-102 30 페이지. Yamaha musical instrument owner's guide
Yamaha PortaSound PSS-102에 대해서도 마찬가지입니다: 소유자 매뉴얼 (30 페이지), 소유자 매뉴얼 (30 페이지), (스페인어) 매뉴얼 델 프로피에타리오 (11 페이지)
페이지 인쇄
POWER SUPPLY
Your PortaSound PSS-101/102 will run either from
batteries or an optional AC power adaptor. Please
follow the instructions below according to the
power source you plan to use.
® Batteries
Put six 1.5V AA-size batteries (SUM-3, R-6, or
equivalent) in the battery compartment.
1. Open the battery compartment cover on the
instrument's bottom panel.
2. Insert six batteries in the directions indicated by
the polarity markings on the cabinet.
3. Replace the cover. Make certain that it locks in
place firmly.
Cautions:
* When the batteries run down, replace all six
batteries with new ones. Never mix old and new
batteries.
* The included batteries are for testing purposes.
ЖА
Their service life might be shortened due to
storage conditions, etc.
@ Optional AC power adaptor
Insert the DC output plug from the optional
Yamaha AC power adaptor (PA-1, PA-1B, or PA-3)
into the DC(9 —12V)IN jack on the rear panel. Then
plug the adaptor to a standard wall outlet.
了
HEAD PHONES/
pc 9~12V ІМ
AUX OUT
<>
Caution:
* Use ONLY a Yamaha РА-1, PA-1B or PA-3
Power Adaptor to power your instrument.
Attempting to use other AC adaptors could
result in serious damage.