Yamaha Portatone PSR-18 공인 제품 설명서 - 페이지 3

{카테고리_이름} Yamaha Portatone PSR-18에 대한 공인 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Portatone PSR-18 21 페이지. Yamaha keyboard user manual
Yamaha Portatone PSR-18에 대해서도 마찬가지입니다: 소유자 매뉴얼 (11 페이지), 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (10 페이지), (일본어) 사용 설명서 (36 페이지)

페이지 인쇄

Power Supply

Your PSR-18 will run either from batteries (sold separately) or an optional power

adaptor. Follow the instructions below according to the power source you intend

to use.

Using Batteries

Six 1.5V D size (SUM-1 or R-20) or equivalent alkaline batteries (sold separately)

must first be installed in the battery compartment.

1. Open the battery compartment cover located on the instrument's bottom panel.

2. Insert the six batteries, being careful to follow the polarity markings on the

cabinet.

3. Replace the compartment cover, making sure that it locks firmly in place.

Caution:

1. When the batteries run down, replace them with a complete set of six new bat-

teries. NEVER mix old and new batteries.

2. To prevent possible damage due to battery leakage, remove the batteries from

the instrument if it is not to be used for an extended period of time.

Using An Optional Power Adaptor

Plug the DC output cable from an optional PA-3, PA-4 or PA-40 Power Adaptor

into the DC(9-12V)IN jack on the rear panel, then plug the adaptor into a conve-

nient wall AC power socket.

Use ONLY a Yamaha PA-3, PA-4 or PA-40 Power Adaptor to power your in-

strument from the AC mains. Attempting to use other AC adaptors could result

in serious damage to your PSR-18.

Using Headphones or an External

Sound System

The Rear-panel HEADPHONES/AUX. OUT Jack

A standard pair of stereo headphones can be plugged in here for private practice

or late-night playing. The internal stereo speaker system is automatically shut off

when a pair of headphones is plugged into the HEADPHONES/AUX. OUT jack.

The HEADPHONES/AUX. OUT jack can also be used to deliver the output of

the PSR-18 to a keyboard amplifier, stereo sound system, mixing console or tape

recorder. Use the optional Yamaha connecting cord to connect the HEAD-

PHONES/AUX. OUT jack to your sound system.

Setting Up & Removing the

Music Stand

The PSR-18 is supplied with a music stand that can be attached to the instrument

by inserting the two pegs extending from its lower edge into the corresponding

holes on the rear-panel of the instrument.

To remove the music stand, remove the pegs from the holes while leaning the stand

toward the keyboard.