Yamaha PortaTone PSR-84 소유자 매뉴얼 - 페이지 38

{카테고리_이름} Yamaha PortaTone PSR-84에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha PortaTone PSR-84 49 페이지. Yamaha electric keyboard owner's manual
Yamaha PortaTone PSR-84에 대해서도 마찬가지입니다: 소유자 매뉴얼 (49 페이지), 소유자 매뉴얼 (49 페이지), (영어) 사용 설명서 (48 페이지)

페이지 인쇄

€ Transmitted Data

The following data is transmitted via the MIDI OUT

connector when either the Remote Control or Multi Voice

mode is selected:

* The transmit channel for each voice is set using the

MIDI CHANNEL button described on page 26.

* All notes played on the keyboard, including velocity data.

In the SPLIT mode the left- and right-hand voices are

transmitted on their respective transmit channels.

«In the FINGERED or SINGLE FINGER mode, only data

corresponding to notes played on the right-hand section

of the keyboard is transmitted.

* Transmitted note numbers are affected by the Trans-

pose setting.

* Transmitted note numbers are affected by the octave

setting.

* Program change and control change data will not be

transmitted if the DUAL function is engaged. Turn DUAL

off if you want this data to be transmitted.

* Pitch bend data. The actual pitch bend data range is

determined by the pitch bend range setting. If the pitch

bend range is set to 12, for example, data from 00H 00H

to 7FH 7FH will be transmitted. If the pitch bend range is

setto 1, data from 3CH 3AH to 20H 45H will be transmit-

ted.

* The MIDI program change number corresponding to the

number of the selected voice is transmitted when a voice

is selected.

* MIDI control change messages corresponding to reverb

(PSR-85 only), pan, volume, and sustain are transmitted

when these functions are operated. For details refer to *

below.

*AMIDI START message is transmitted whenever the

rhythm or accompaniment is started, and

a MIDI STOP

message is transmitted whenever the rhythm or accom-

paniment is stopped. The same applies to demo and

song memory start/stop operations.

* Style, custom style, demo, multi pad (PSR-85), drum

pad (PSR-84 ), notes added by the auto harmony func-

lion, and song memory playback are not transmitted.

* When a VOICE MEMORY button is pressed, the program

change and control change data corresponding to that

voice is transmitted. The previous panel data is

transmitted when a VOICE MEMORY is turned off.

FEATURE REFERENCE (mip)

* Control Change Data Value Specifica-

tions

(receive and transmit, both modes)

Data Format : BnH -» cc -» vv

BnH: Control Event (n=channel number)

cc : Control Number

vv : Control Value

cc=01H

; vibrato

vv=

OOH - OFH : 0 (off)

10H - 1FH : 1 (min)

20H -2FH:

30H - 3FH:

40H - 4FH:

50H - 5FH:

60H - 6FH:

70H - 7FH : 7 (max)

Each voice has its own default value that is used when the

voice is initially selected.

NAUN

cc=07H ; volume

vv=

7FH

:24 (Panel Value ; max)

01H

:01 (-24dB)

00 H : 00 (no sound)

The default value when no data is being transmitted is 6F

(panel value: 21).

cc=0AH ; pan

vv=

00H - 07H ` -7 (Left Most)

08H - OFH : -6

10H - 17H : -5

18H - 1FH :-4

20H - 27H :-3

28H - 2FH : -2

30H - 37H : -1

38H - 47H : 0 (Center)

48H - 4FH:1

50H - 57H :2

58H - 5FH:3

60H - 67H :4

68H - 6FH:5

70H - 77H :6

78H - 7FH : 7 (Right Most)

The default value is "center" when no data is being trans-

mitted.

cc=40H : sustain

vv-

00H - 3FH : off

40H - 7FH ` on

Default is off.

cc=5BH : reverb (PSR-85 only)

00H - 07H : 0 (Off)

08H - OFH: 1

10H - 17H :2

18H - 1FH:3

20H - 27H :4

28H - 2FH:5

30H - 37H : 6 (Default)

38H - 3FH:7

40H - 47H:8

48H - 4FH:9

50H - 57H : 10

58H - 5FH: 11

60H - 67H: 12

68H - 6FH: 13

70H - 77H : 14

78H - 7FH : 15 (max)

cc=7BH : ail notes off

vv=

00H (fixed)