Yamaha PSR-E263 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Yamaha PSR-E263에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha PSR-E263 28 페이지. Digital keyboard
Yamaha PSR-E263에 대해서도 마찬가지입니다: 소유자 매뉴얼 (48 페이지), 소유자 매뉴얼 (28 페이지), 소유자 매뉴얼 (28 페이지), 소유자 매뉴얼 (50 페이지), 소유자 매뉴얼 (28 페이지), 소유자 매뉴얼 (28 페이지)

페이지 인쇄
Yamaha PSR-E263 소유자 매뉴얼
Style List
(page 23)
!6
!7
!8
@0
@1
!4
[SYNC START] button
Enables/disables the ability to start playback by simply play-
ing the keyboard.
!5
[START/STOP] button
Starts/stops Song playback in the Song mode, or Style
playback in the Style mode.
!6
[SONG] button
Calls up the Song selection display.
Enters the Song mode.
!7
[VOICE] button
Calls up the Voice selection display.
If you hold down this button in the Song mode, the current
Voice will be assigned to the Melody of the current Song.
!8
[STYLE] button
Calls up the Style selection display.
Enters the Style mode.
!9
Number buttons [0]–[9], [+], [-]
Selects the setting value for items such as Voice, Style,
Song and Tempo.
@0
[PORTABLE GRAND] button
Makes the appropriate settings for piano performance only.
@1
[ULTRA-WIDE STEREO] button
Press this to turn on the ULTRA-WIDE STEREO Effect.
Holding this down calls up the Master EQ Type selection
display (Function number 013 on page 13.)
@2
[SOUND EFFECT] button
Lets you play various Sound Effects from the keyboard.
@3
[FUNCTION] button
Pressing this repeatedly calls up various parameters in
sequence.
@4
Drum illustrations for the Drum Kit
Indicates drum instruments assigned to each key when the
Standard Kit 1 is selected.
!9
@2
@3
Panel Controls and Terminals
Rear Panel
@5
@6
@7
@5
AUX IN jack
For connecting an external audio device.
See page 12.
@6
PHONES/OUTPUT jack
For connecting headphones and external
audio equipment
NOTICE
• To avoid possible damage to the external
device, first turn on the power to the instru-
ment, then to the external device. When turn-
ing off the power, do so in reverse order: first
turn off the power to the external device,
then to the instrument.
@7
SUSTAIN jack
For connecting a Footswitch.
@8
DC IN jack
For connecting the AC adaptor.
The "Press & Hold" Symbol
Buttons having this indication can be
used to call up an alternate function
when the relevant button is pressed
and held. Hold down this button until
the function is called up.
PSR-E263 YPT-260 Owner's Manual
@8
9