Yamaha Aventage RX-A720 빠른 매뉴얼 - 페이지 2
{카테고리_이름} Yamaha Aventage RX-A720에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Aventage RX-A720 4 페이지. Quick guide
Yamaha Aventage RX-A720에 대해서도 마찬가지입니다: 기능 및 사양 (2 페이지), 설정 매뉴얼 (19 페이지)
페이지 인쇄
■ Connections
Caution
• Before connecting the speakers, remove the unit's power cable from the AC wall outlet.
• Ensure that the core wires of the speaker cable do not touch each other or come into contact with the
unit's metal areas. This may damage the unit or the speakers.
• Connect the speakers with the correct polarity.
1
Connect the speaker in Zone2 to the EXTRA SP terminals with
speaker cables.
The type of the speaker terminals varies depending on the model.
The unit (rear)
Left
(Rotate-type)
c
+ (red)
b
a a
d
- (black)
2
EXTRA SP terminals
ZONE 2/PRESENCE
EXTRA SP
Right
Speakers (Zone2)
(Push-type)
E 2
/P R
E X
E S
T R
E N
A S
C E
P
a a
d
b
+ (red)
c
- (black)
2
Connect the playback devices (such as BD/DVD players and CD
players) in the main zone to the analog stereo input jacks with stereo
pin cables.
Only analog audio sources (including FM/AM radio), and USB and network
sources can be output to Zone2. To listen to the playback of an external device
in Zone2, you need to connect the device to the analog audio input jacks.
AV 5–6 jacks
AUDIO 1–2 jacks
The unit (rear)
L
L
R
R
3
Connect the power cable to an AC wall outlet.
To operate the unit and external devices from Zone2
You can operate the unit and external devices from Zone2 using the supplied remote
control if you connect an infrared signal receiver/emitter to the unit's REMOTE IN/OUT
jacks. For details, refer to the Owner's Manual in the supplied CD-ROM.
BD/DVD player
L
L
R
R
AUDIO
OUT
CD player