Yamaha Aventage RX-A720 설정 매뉴얼 - 페이지 8

{카테고리_이름} Yamaha Aventage RX-A720에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Aventage RX-A720 19 페이지. Quick guide
Yamaha Aventage RX-A720에 대해서도 마찬가지입니다: 빠른 매뉴얼 (4 페이지), 기능 및 사양 (2 페이지)

페이지 인쇄

Use the cursor keys to select

"Save/Cancel" and press ENTER.

Use the cursor keys to select "SAVE" and

press ENTER.

Disconnect the YPAO microphone from the

unit.

This completes optimization of the speaker settings.

• The YPAO microphone is sensitive to heat, so should not be

placed anywhere where it could be exposed to direct sunlight or

high temperatures (such as on top of AV equipment).

If "W-1:Out of Phase" appears

Follow the procedure below to check the speaker

connections.

Depending on the type of speakers or room

environment, this message may appear even if the

speakers are connected correctly.

a Use the cursor keys to select "Result" and press ENTER.

b Use the cursor keys to select "Wiring".

c Check the cable connections (+/–) of the speaker that

was identified as being "Reverse" in the warning

message.

If the speaker is connected correctly:

You can save the current settings.

Press RETURN and proceed to step 3.

If the speaker is connected incorrectly:

Turn off the unit, reconnect the speaker cable, and then

try YPAO measurement again.