Yamaha CRX-N560D 펌웨어 업데이트 절차

{카테고리_이름} Yamaha CRX-N560D에 대한 펌웨어 업데이트 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha CRX-N560D 4 페이지. Network cd receiver
Yamaha CRX-N560D에 대해서도 마찬가지입니다: 소유자 매뉴얼 (50 페이지)

페이지 인쇄

IMPORTANT NOTICE

Follow the instructions carefully and do not attempt any other procedures not specified in the

instructions provided by Yamaha.

Improperly updated products may cause improper operation, and any parts or service required to

restore proper operation will not be covered under the Yamaha Limited Warranty.

Choose from the following 2 methods to update to the latest firmware.

Click here for

In case of error, see the

[ 1. Firmware Update Through the Internet ]

Requirements:

Your network CD receiver is connected to the Internet if you can receive

Internet radio stations. (See owner's manual for details)

STEP 1

Power on the unit and enter option settings

Press OPTION button on the remote control.

STEP 2

Start Update

Using the UP/DOWN buttons, select menu "System Config"

and press ENTER button. After that, select "Firm Update" using

UP/DOWN buttons and press Enter button.

Initially, "Network" is flashing on the display.

To perform network update, select "Network" and press Enter button.

Firmware Update Procedure for

CRX-N560/N560D (MCR-N560/MCR-N560D)

Firmware Update Through the Internet

(Connection to the Internet is required)

Firmware Update by USB

(A USB thumb drive is required)

Troubleshooting

section

DOWN

(Update in progress...)

OPTION

ENTER