Yamaha HTR-3063BL 빠른 참조 매뉴얼 - 페이지 7

{카테고리_이름} Yamaha HTR-3063BL에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha HTR-3063BL 9 페이지. Quick reference guide

페이지 인쇄

Press Cursor B / C to select the speaker (subwoofer) that you want to confi gure, and press Cursor D / E

to set the distance.

If necessary, you can change the setting units under "Unit."

Information

Description

Unit

Switches between setting units (feet / meters).

Front L

Front speaker L

Front R

Front speaker R

Center

Center speaker

Sur. L

Surround speaker L

Sur. R

Surround speaker R

SWFR

Subwoofer

When you have completed the settings for one speaker, repeat the same procedure for all speakers to complete settings.

Press RETURN when setting is complete.

This completes step 3.

STEP 4: Playback a test tone

Press Cursor C repeatedly to display "Test Tone" and press ENTER.

Use Cursor D / E to select "On."

A test tone plays back from the speakers as soon as you select "On." The test tone plays back in a clockwise fashion. Only speakers

confi gured for use in procedure 5 output the test tone.

Check that the test tone is playing back and press RETURN.

This completes step 4.

STEP 5: Adjust the volume

Press Cursor B repeatedly to display "Level" and press ENTER.

Use Cursor B / C to switch the speaker that is

outputting the test tone, looking for speakers with

a different volume level to the others.

The front panel display shows the speaker that is outputting

the test tone.

Only speakers confi gured for use in procedure 5 output the

test tone.

If you fi nd a speaker with a different volume level to the others, use Cursor D / E to adjust the volume. Use

Front speaker L or R as a default when adjusting volumes.

To raise the volume: Press Cursor E.

To lower the volume: Press Cursor D.

Repeat steps 14 and 15 to adjust the volume balance for all speakers to your preference.

Press RETURN when setting is complete.

Return to the previous menu.

This completes step 5.

Repeat procedures 10-12 (step 4) to stop playback of the test tone.

Once you have completed all settings, press SETUP to close the Setup menu.

Setting

feet (ft) / meters (m)

1.0 ft to 80.0 ft (0.30 m to 24.0 m)

Information

SWFR

- 7 -

TEST

VOL.

>Off

LEVEL