Yamaha HTR-5063 빠른 참조 매뉴얼 - 페이지 6
{카테고리_이름} Yamaha HTR-5063에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha HTR-5063 9 페이지. Yamaha rx-v567/htr-5063 hdmi blu-ray/dvd, cable/sat and component video game console hookup diagram
Yamaha HTR-5063에 대해서도 마찬가지입니다: 연결 다이어그램 (2 페이지)
페이지 인쇄
5
5
Set up the speaker parameters automatically (YPAO)
When connection is fi nished, adjust the status, sizes, and volume balance of the
speakers to provide an optimal sound fi eld. This unit is equipped with a YPAO
(Yamaha Parametric Room Acoustic Optimizer) function that adjusts the speaker
balance automatically with a simple procedure.
When you use YPAO, a test tone will be output from the speakers for approximately 3 minutes and acoustic measuring will be performed.
When using YPAO, be careful of the following.
•
The test tone is output at high volume. Please refrain from using this function at night when it may be a nuisance to others nearby.
•
Please take care that the test tone does not frighten any small children.
When operating the YPAO, information is displayed both on the TV screen (On-Screen Display) and on the front panel. This explanation will use
operations while viewing the display on the TV screen.
1
Check the following before using YPAO.
This unit
•
The headphones are removed.
TV
•
This unit is connected to the TV correctly.
•
The power is turned on.
•
The video input to which the video output from this unit has been selected.
Subwoofer
•
The power is turned on.
•
Volume is set to approximately half, and the cross-over frequency (if present)
is set to maximum.
2
Place the supplied YPAO microphone at ear height in your listening position.
When positioning the microphone, we recommend that you use
equipment that allows you to adjust the height (such as a tripod) as a
microphone stand. When using a tripod, use the tripod screws to fi x
the microphone in place.
3
Press RECEIVER A on the remote control to switch this unit on.
4
Connect the YPAO microphone to the YPAO MIC jack on the front panel.
YPAO MIC
"MIC ON. View OSD MENU" appears
on the front panel display, and then
appears the following display on the TV
screen.
INFO
YPAO microphone
- 6 -
CROSSOVER/
HIGH CUT
VOLUME
MIN
MAX
MIN
MAX
Subwoofer examples
YPAO microphone
Auto Setup
EQ Type;;;;Natural
. Start
[OPTION]:EQ Select
[SETUP]:Start
Continues to
the next page