Yamaha HTR-5230RDS 소유자 매뉴얼 - 페이지 28
{카테고리_이름} Yamaha HTR-5230RDS에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha HTR-5230RDS 50 페이지. Natural sound av receiver
페이지 인쇄Automatic tuning is effective when station signals are
strong and there is no interference. However, if the signal
from the station you want to select is weak, you must tune
in to it manually (manual tuning).
–
+
–
+
Automatic Tuning
1
Use INPUT to select the
tuner as the input source.
2
Press FM/AM to select the reception band (FM
or AM).
"FM" or "AM" appears on the display.
3
Press TUNING MODE so that the "AUTO"
indicator lights up on the display.
4
Press PRESET/TUNING (EDIT) to turn " z " off.
26
1
L
R
5
4
2
3
or
Lights up
Turn " z " off
TUNING
5
Press PRESET/TUNING h once to tune in to a
higher frequency and l once to tune in to a
lower frequency.
Press the button again if the tuning search does not stop
at the desired station.
Note
• If you tune in manually to an FM station, it will be automatically
received in monaural mode to increase the signal quality.
y
• Use the manual tuning method if the tuning search does not stop
at the desired station (because the signal from the station is weak).
• When tuned in to a station, the frequency of the received station is
shown on the display. If an RDS station that offers the PS data
service is being received, the station name is shown instead of the
frequency on the display.
Manual Tuning
1
Use INPUT to select the
tuner as the input source.
2
Press FM/AM to select the reception band (FM
or AM).
"FM" or "AM" appears on the display.
3
Press TUNING MODE so that the "AUTO"
indicator goes off.
4
Press PRESET/TUNING (EDIT) to turn " z " off.
5
Press PRESET/TUNING h or l to tune in to
the desired station.
To continue the tuning search, hold down the button.
or
Goes off
Turn " z " off