Yamaha HTR-5920 소유자 매뉴얼 - 페이지 36
{카테고리_이름} Yamaha HTR-5920에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha HTR-5920 45 페이지. Digital home theater system
av receiver
Yamaha HTR-5920에 대해서도 마찬가지입니다: 서비스 매뉴얼 (38 페이지)
페이지 인쇄
ADVANCED OPERATIONS
Adjusting speaker levels
Use the test tone to set speaker levels so that the volume
from each speaker is identical when heard from your
listening position.
2,3
2
1
Press TEST on the remote control.
Each speaker produces the test tone in the following
order:
Front left→Center→Front right→Surround right→
Surround left→Subwoofer→Front left→...
The indicator of the speaker currently outputting the
test tone flashes in the front panel display.
2
Press LEVEL on the remote control and then
press
/
repeatedly to select the
speaker you want to adjust.
LEVEL
FL
Front left speaker output level
CT
Center speaker output level
FR
Front right speaker output level
SR
Surround right speaker output level
SL
Surround left speaker output level
SW
Subwoofer output level
3
Press
/
on the remote control to adjust
the speaker output level.
The control range is from +10 dB to –10 dB.
32
VOLUME
SET MENU
MUTE
ENTER
LEVEL
TEST
1,5
HALL
JAZZ
ROCK
PL
5 STEREO
NIGHT
STEREO
TEST
ENTER
ENTER
4
Repeat steps 2 and 3 to adjust other speaker
output levels.
5
Press TEST when you have completed your
adjustment.
The test tone halts.
Notes
• You cannot use the test tone if headphones are connected to the
PHONES jack. Remove the headphones from the PHONES
jack.
• You cannot adjust "CT", "SR", "SL" and "SW" if "CNTR",
"SURR" and "SWFR" are set to "NONE" (page 19).
y
Depending on the source the unit is reproducing, the speaker
levels set with the test tone may not be to your liking. If this is the
case, adjust the speaker levels while listening to the source.
Adjusting speaker levels during
playback
You can adjust the output level of each speaker while
listening to a music source.
1 Press SET MENU repeatedly so that "SPK LEVEL"
appears in the front panel display, and then press ENTER.
2 Press
/
to select a speaker and then
the speaker output level.
• Select "FL" to adjust the front left speaker output level.
• Select "CT" to adjust the center speaker output level.
• Select "FR" to adjust the front right speaker output level.
• Select "SR" to adjust the surround right speaker output
level.
• Select "SL" to adjust the surround left speaker output level.
• Select "SW" to adjust the subwoofer output level.
TEST
/
to adjust