Yamaha NS-IW280C 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Yamaha NS-IW280C에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha NS-IW280C 8 페이지. Stereo receiver, speaker
Yamaha NS-IW280C에 대해서도 마찬가지입니다: 소유자 매뉴얼 (37 페이지)

페이지 인쇄

Connect the push-type input terminals at the rear of the speakers to the speaker output terminals of the

receiver.

Connect the (+) terminals on the receiver and speakers using the corresponding side of the cable. Connect

the (–) terminals on both components using the other side of the cable.

Receiver

Notes:

Make sure that the bare wires are not touching each other as this could damage the speaker and receiver.

Connect one speaker to the left terminals of your receiver, and another speaker to the right terminals,

making sure not to reverse the polarity (+, –). If one speaker is connected with reversed polarity, the sound

will be unnatural and lack bass.

How to connect

1 Remove the insulation coating at the extremity of

each speaker cable by twisting the coating off.

2 Press and hold down the speaker terminal.

3 Insert the bare wire.

4 Release the terminal. Test the firmness of the

connection by pulling lightly on the cable at the

terminal.

Black (–)

(–)

(+)

NS-IW280C

CONNECTIONS

+ –

Red (+)

NS-IW280C

When using a banana plug

1 Insert the banana plug into the top of the terminal

as shown below:

Banana plug