Yamaha R-N500 펌웨어 업데이트 - 페이지 4

{카테고리_이름} Yamaha R-N500에 대한 펌웨어 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha R-N500 4 페이지.
Yamaha R-N500에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지)

note:

DO NOT

In case the power is accidentally cut off, the R-N500 will restore original firmware. Perform the

update procedure from STEP 1 again.

STEP 7

Confirm updated firmware version

Retry from STEP 2 to enter "ADVANCED MODE". Rotate SELECT/ENTER to select firmware

version. Confirm that the firmware version has been updated.

Congratulations!

You have completed the firmware update. Your R-N500 is ready for normal use.

[ 3. Troubleshooting ]

In case error message appeared during the update and unable to power on, perform following

update procedure.

STEP 1

Copy the update file to a USB thumb drive

Unzip the downloaded file and copy to the root directory of a USB thumb drive.

Be sure to delete all other files in a USB thumb.

STEP 2

Insert the USB thumb drive on the front panel

In this step, AC power cable needs to be disconnected and power switch on the front panel is

pressed to POWER/ON in advance.

STEP 3

Enter firmware update mode

Connect AC power cable to AC outlet, while pressing DIMMER button.

"USB UPDATE" will be shown in the front panel display.

Firmware update will be started automatically.

note:

DO NOT

In case the power is accidentally cut off, perform the update procedure from STEP 1 again.

Update is completed when "UPDATE SUCCESS", "PLEASE...", "POWER OFF!" is displayed

alternately. Then, power off the unit.

STEP 4

Confirm updated firmware version

Enter "ADVANCED SETUP" mode as introduced in Firmware Update Through the Internet/by

USB in previous sections. Rotate SELECT/ENTER to select firmware version. Confirm that the

firmware version has been updated.

Congratulations!

You have completed the firmware update. Your player is ready for normal use.

Firmware Update Procedure for R-N500

interrupt the power or press any buttons during the update.

X.XX

interrupt the power or press any buttons during the update.

(X.XX shows actual firmware version.)