Yamaha RX-V567 업데이트 - 페이지 5

{카테고리_이름} Yamaha RX-V567에 대한 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha RX-V567 5 페이지. Firmware update version f018 (including htr-4063/htr-5063)
Yamaha RX-V567에 대해서도 마찬가지입니다: 연결 다이어그램 (2 페이지), 빠른 참조 매뉴얼 (9 페이지), 빠른 참조 매뉴얼 (9 페이지)

페이지 인쇄
Yamaha RX-V567 업데이트
IN CASE OF ERROR
Case1 Display on the receiver "CDDA Upgrader" doesn't change after playing the
BD/DVD/CD player.
Check digital cable wiring. Only optical or coaxial connection can be used for
this update. HDMI connection will not work.
Check digital out setting. When using DVD/BD players, make sure the digital
out is set to "PCM". Once update is completed, reset DVD/BD player to its
original settings.
Check update disc. Make sure that your CD-R/RW is finalized and created
as an "AUDIO CD". (playable on any BD/DVD/CD player)
If all above are cleared, your BD/DVD/CD player may not be suited for this
update.
service center to update the receiver for you.
Case2 Other unintended error occurred.
"ERROR" was displayed during the update
Receiver doesn't power up after the update.
Solution: Try the following recovery method
Step PL1. Unplug the AC power cable of the AV receiver from wall outlet.
Step PL2. On the front panel of the AV receiver, press and hold the [INFO] button
and keep it pressed, while you plug the AC power cable of the Yamaha
receiver to the wall outlet. Once the front panel displays "CDDA
Upgrader" release the [INFO] button.
Step PL3. Go to Step 4
Firmware Update Procedure for RX-V467/RX-V567
Try another BD/DVD/CD player or contact your local authorized
"START FIRMWARE
Page.5 of 5
UPDATE".