Yamaha YHT-693 소유자 매뉴얼 - 페이지 12
{카테고리_이름} Yamaha YHT-693에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YHT-693 20 페이지. Home cinema speaker package
Yamaha YHT-693에 대해서도 마찬가지입니다: 소유자 매뉴얼 (11 페이지), 소유자 매뉴얼 (8 페이지)
페이지 인쇄
CONTROLS AND THEIR FUNCTIONS
1
1
POWER switch
Press this switch to the ON position to turn on the
power to the subwoofer. When the power of the
subwoofer is on, the power indicator (4) on the rear
panel light up in green. Press this switch again to set it
to OFF position to turn off the power of the subwoofer.
2
OUTPUT (TO SPEAKERS) terminals
Can be used for connecting to the front speakers.
Signals from the INPUT 1 terminals are sent to these
terminals.
(Refer to "CONNECTIONS" for details.)
3
VOLUME control
Adjusts the volume level. Turn the control clockwise to
increase the volume, and counterclockwise to decrease
the volume.
4
Power indicator
Light up in green when the power switch (1) is turned
on; turns off when the power switch is turned off.
8
Subwoofer rear panel
OUTPUT
INPUT
HIGH
TO SPEAKERS
2
CUT
/MONO
VOLUME
HIGH LOW
INPUT 1
FROM AMPLIFIER
POWER
ON
OFF
2
OUTPUT
TO SPEAKERS
INPUT 1
FROM AMPLIFIER
7
5
HIGH CUT switch
Selects the high frequency cut off point. Normally, it is
set to LOW, however, you may set to HIGH if
necessary. (Refer to page 9)
6
INPUT 2 terminals
Used to input line level signals from the amplifier.
(Refer to "CONNECTIONS" for details.)
7
INPUT 1 (FROM AMPLIFIER) terminals
Used to connect the subwoofer with the speaker
terminals of the amplifier.
(Refer to "CONNECTIONS" for details.)
3 4
HIGH
INPUT
CUT
2
/MONO
VOLUME
HIGH LOW
6 5