Yamaha 001PO-03C0 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Yamaha 001PO-03C0에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha 001PO-03C0 19 페이지. Yamaha power amplifier owner's manual

페이지 인쇄

Connections

• Before connecting the device to other devices, turn off the power for all devices.

Before turning the power on or off for all devices, set all volume levels to

minimum.

• Turn off the power before connecting speakers, and use only the speaker cables

for connecting speakers to the speaker jacks.

Failure to do so can result in ﬁre or electrical shock.

Handling caution

• When turning on the AC power in your audio system, always turn on the device

LAST, to avoid speaker damage. When turning the power off, the device should

be turned off FIRST for the same reason.

• Condensation can occur in the device due to rapid, drastic changes in ambient

temperature – when the device is moved from one location to another, or

airconditioning is turned on or off, for example. Using the device while

condensation is present can cause damage. If there is reason to believe that

Yamaha cannot be held responsible for damage caused by improper use or modiﬁcations to the device, or data that is lost or destroyed.

Always turn the power off when the device is not in use.

The performance of components with moving contacts, such as switches, volume controls, and connectors, deteriorates over time. Consult qualiﬁ ed Yamaha service

personnel about replacing defective components.

European models

Purchaser/User Information speciﬁed in EN55103-1 and EN55103-2.

Inrush Current: 26A

Conforms to Environments: E1, E2, E3 and E4

* Speciﬁcations and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or speciﬁcations

at any time without prior notice. Since speciﬁcations, equipment or options may not be the same in every locale, please check with your Yamaha dealer.

WARNING: THIS APPARATUS MUST BE EARTHED

IMPORTANT. The wires in this mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW : EARTH

BLUE

BROWN

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in

your plug proceed as follows:

The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the

safety earth symbol

or colored GREEN or GREEN-and-YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

• This applies only to products distributed by Yamaha Music U.K. Ltd.

IPA8200 Owner's Manual

IMPORTANT NOTICE FOR THE UNITED KINGDOM

Connecting the Plug and Cord

: NEUTRAL

: LIVE

(5)-6

condensation might have occurred, leave the device for several hours without

turning on the power until the condensation has completely dried out.

• Do not insert your ﬁngers or hands in any gaps or openings on the device

(vents).

• Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any

gaps or openings on the device (vents) If this happens, turn off the power

immediately and unplug the power cord from the AC outlet. Then have the

device inspected by qualiﬁed Yamaha service personnel.

• Do not use speakers for a long period of time at a high or uncomfortable volume

level, since this can cause permanent hearing loss. If you experience any

hearing loss or ringing in the ears, consult a physician.

• Do not rest your weight on the device or place heavy objects on it, and avoid use

excessive force on the buttons, switches or connectors.

• Do not use this device for any purpose other than driving loudspeakers.

2/2

(3 wires)