Yamaha A-670 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Yamaha A-670에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha A-670 47 페이지.

Make sure to connect L (left) to L, R (right) to R, "+" to "+" and "–" to "–." If the connections are faulty, no sound may be heard from the speakers, and if the polarity of the speaker

connections is incorrect, the sound may be unnatural and lack bass. Refer to the owner's manual for each of your components. Make sure to use RCA type cables, the supplied system

connection cable, or a commercially available USB cables (A-U670 only) to connect audio components.

CAUTION

Do not connect this unit or other components to the main power until all connections between components are complete.

Connecting a network CD player

As shown in the figure, connect the ANALOG OUT jacks of the network CD player (CD-

NT670) to the ANALOG IN jacks of the unit by using the RCA stereo cable supplied with

the network CD player, and connect the SYSTEM jacks of the both equipment to each

other by using the supplied system connection cable.

When the SYSTEM jacks of the unit and the network CD player are connected to each

other, you can use the remote control of the network CD player to operate the unit

(+page 10).

CONNECTIONS

Connecting speakers

Connect the SPEAKERS terminals of the unit and the terminals of the speakers as shown

in the figure.