Yamaha AG-Stomp 소유자 매뉴얼 - 페이지 27
{카테고리_이름} Yamaha AG-Stomp에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha AG-Stomp 32 페이지. Yamaha accoustic guitar/pre-amplifier owner's manual
Yamaha AG-Stomp에 대해서도 마찬가지입니다: 서비스 매뉴얼 (45 페이지), 패치 목록 (1 페이지), (네덜란드어) 매뉴얼 (32 페이지)
G Set the Maximum Value of the EXP. Pedal
Sets the maximum value that indicates the position
of the EXP. Pedal.
Press the [FR 1] button and use the [UP]/[DOWN]
buttons to set the position (
You can also hold the [FR 1] button and move the
EXP. Pedal to set the position.
* Due to the relationship between the maximum and minimum
value, a value which results in a practical range of less than
128 can not be used.
* The value can not be set greater than that of the EXP. Pedal's
Switch Setting.
Practical Effective
Range
G Transmitting Control Change Numbers from
the EXP. Pedal
Sets the MIDI control change number that is to be
transmitted when the EXP. pedal is used.
Press the [FR 2] button and use the [UP]/[DOWN]
buttons to set the control change number.
oFF
•
: MIDI is not transmitted
1
32
64
95
•
-
,
-
:
The control change number that is to be
transmitted.
I Feedback Reduction Operating
Mode
Press the [UTILITY] button and set the MIC TYPE
Select Switch to TUBE 1. After "
display, the current setting is displayed.
Use the [UP]/[DOWN] buttons to set the Feedback
Reduction Operating Mode.
GLb
•
: Even if the patch is changed, the same
Feedback Reduction parameters and
settings will remain active (the same as
the current condition).
PrG
•
: When patches are changed, the Feed-
back Reduction's parameters and set-
tings will be changed to those that are
stored with the patch's data.
127
255
-
).
Maximum
Minimum
Adjustable
Value
Range
Maximum
Value
F. r
" appears in the
Utility Mode
27