Yamaha C 160 소유자 매뉴얼 - 페이지 6
{카테고리_이름} Yamaha C 160에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha C 160 12 페이지. Yamaha power amplifier owner's manual
Yamaha C 160에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지)
페이지 인쇄Modes: STEREO/PARALLEL/BRIDGE
STEREO mode
In this mode, channels A and B operate independently
(as a conventional stereo amp).
The CHANNEL A input signal will be output from
the CHANNEL A output terminals, and the CHAN-
NEL B input signal will be output from the CHAN-
NEL B output terminals.
PARALLEL mode
In this mode, the CHANNEL A input signal will be
output from the output terminals of both channels A
and B. The CHANNEL B input terminals is not used.
The (channel)
A
and
independently.
SPEAKER IMPEDANCE
In STEREO and PARALLEL modes, the minimum
load (=speaker) impedance is 4 . In BRIDGE mode it
is 8 .
Make sure that the impedance does not fall below this
specified impedance.
STEREO mode connections
BRIDGE
Set to STEREO
STEREO
PARALLEL
PARALLEL mode connections
BRIDGE
Set to PARALLEL
STEREO
PARALLEL
4
B
volumes can be adjusted
SPEAKERS
CHANNEL B
CHANNEL A
BRIDGE
STEREO
MAX. OUTPUT 450W/4 (STEREO)
MAX. OUTPUT 900W/8 (BRIDGE)
–
+
+
–
4 min.
4 min.
Speaker System
SPEAKERS
CHANNEL B
CHANNEL A
BRIDGE
STEREO
MAX. OUTPUT 450W/4 (STEREO)
MAX. OUTPUT 900W/8 (BRIDGE)
–
+
+
–
4 min.
4 min.
Speaker System
BRIDGE mode
In this mode, the CHANNEL A input signal will be
output from the BRIDGE output terminals. In this
case, use the front panel (channel)
to adjust the volume.
BRIDGE mode connections
BRIDGE
Set to BRIDGE
STEREO
PARALLEL
volume control
A
SPEAKERS
CHANNEL B
CHANNEL A
BRIDGE
STEREO
MAX. OUTPUT 450W/4 (STEREO)
MAX. OUTPUT 900W/8 (BRIDGE)
–
+
8 min.
Speaker System