Yamaha DG-Stomp 소유자 매뉴얼 - 페이지 11

{카테고리_이름} Yamaha DG-Stomp에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DG-Stomp 32 페이지. Guitar pre-amplifier with effects
Yamaha DG-Stomp에 대해서도 마찬가지입니다: 보충 설명서 (1 페이지), 서비스 매뉴얼 (43 페이지)

페이지 인쇄

Connecting Headphones

Connect a pair of headphones to the PHONES jack

(standard stereo) on the DG-Stomp to play or prac-

tice in private.

The volume of the headphones can be controlled

with the OUTPUT knob.

* When a pair of headphones is connected, the output from the

OUTPUT jack and the DIGITAL OUT jack will still deliver

sound output.

When using headphones, use at a comfort-

able volume so as not to cause shock to your

hearing.

Digital Output

The DG-Stomp is equipped with a DIGITAL output

jack (COAXIAL), that can be connected to the DIGI-

TAL INPUT jack on a digital mixer, MD recorder, etc.

* The output level of the DIGITAL OUT jack cannot be con-

trolled with the OUTPUT knob (fixed).

MD recorder, etc.

Connecting an Expression (EXP)

Pedal

A foot controller (expression pedal), such as the

YAMAHA FC-7, connected to the EXP. PEDAL jack

on the DG-Stomp allows control of the DG-Stomp's

individual parameters or use as a wah pedal. (See

pages 21, 25)

Connecting MIDI Devices

Using the MIDI IN/OUT jacks allows the exchange

of MIDI information between the DG-Stomp and an

external MIDI Device.

Data from the DG-Stomp can be stored in MIDI de-

vices such as the YAMAHA MIDI Data Filer MDF3,

etc. also, data from the external device can be

loaded into the DG-Stomp.

Also, a MIDI foot controller, etc. can be used to se-

lect patches in the DG-Stomp, control individual pa-

rameters, set individual effects, etc. Refer to the [Util-

ity Mode] (page 23) for more information on MIDI

functions.

Connections