Yamaha DG-Stomp 서비스 매뉴얼 - 페이지 28

{카테고리_이름} Yamaha DG-Stomp에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DG-Stomp 43 페이지. Guitar pre-amplifier with effects
Yamaha DG-Stomp에 대해서도 마찬가지입니다: 보충 설명서 (1 페이지), 소유자 매뉴얼 (32 페이지)

페이지 인쇄

DG-Stomp

TEST PROGRAM

A. Connect each terminal as follows

• INPUT

• OUT L/MONO

• OUT R

• HEAD PHONES

• EXP. PEDAL

Pin 1 of JK: MIN of VR, Pin 2 of JK: MAX of VR, Pin3

of JK: CENTER of VR

• DIGITAL OUT

• MIDI IN, MIDI OUT

• HIGH/LOW SW

OFF: 0dB, ON: +10dB

• AC IN Connect the AC adapter.

• STAND-BY SW

B. TEST PROGRAM

0: LED Check

1: SW Check

2: VR Check

3: Battery Check

4: MIDI Check

5: SRAM Check

6: DSP Check

C. STARTING THE TEST PROGRAM

While pressing the MANUAL, STORE and HALL switches,

turn on the POWER switch. The TEST program will then

be started.

D. SELECTING THE TEST NUMBER

Using the UP and DOWN switches, select the test number

and press the STORE switch to confirm selection.

E. TEST PROCEDURE

0: LED Check

• Using the UP and DOWN switches, select "0" and

then press the STORE switch.

• LED segments light up one after another starting with

"UP". When "SP.SIM" is reached, "BANK", "3", "2" and

"1" light up followed by 7 segments in the following

order from the left end. After that, all LED segments

light up and go out.

Monaural input

Monaural output (RL47Kohm)

Stereo output (323ohm each)

Connect VR of B50K.

Connect the DA converter.

Connect IN and OUT by using

DIN 5P cable.

Used to select the input level.

Power switch