Yamaha DP-U50 설정 매뉴얼 - 페이지 37

{카테고리_이름} Yamaha DP-U50에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DP-U50 47 페이지. Personal sound processer
Yamaha DP-U50에 대해서도 마찬가지입니다: 서비스 매뉴얼 (46 페이지), 서비스 매뉴얼 (46 페이지)

페이지 인쇄

BASIC OPERATION

Recording on a computer (via the USB connection)

When recording or processing signals inputted to your

computer via the USB connection, the following setting is

needed on the computer.

Selecting Recording Device

When using Windows

1. Click the Windows "Start" button and select

"Settings", and then "Control Panel".

2. Double-click the "Multimedia" icon (or the "Sounds

and Multimedia" icon).

3. Click the "Audio" tab and select "USB Audio Device"

at "Preferred device" of "Recording" (or "Sound

Recording").

When using a Macintosh

Select "USB Audio" as the input device at "Sound" on

the Control Panel.

Setting of Recording Software

Select a sampling frequency from 44.1 kHz and 48

kHz. Select a resolution from 16 bits and 24 bits. The

sampling frequency of 44.1 kHz with the resolution of

16 bits produces a sound quality comparable to the

compact disc (CD).

USB

AUX1

AUX2

VIRTUAL

5.I

DIGITAL

USB PCM

D. DSP

PROLOGIC FM AM ST

VOL

DSP

M U T E

Notes

● Please check the copyright laws in your country before recording, compact discs, radio, etc. Recording of copyright

material may infringe copyright laws.

● You cannot make a recording from a CD-R, MD, etc. which is a copy of an audio CD, to another CD-R, MD, etc. via the USB

connection or the digital terminal connection. Also, you cannot make a recording from an MD which is recorded with digital

signals received via the USB connection, to another MD.

E-

POWER

USB

AUX1

AUX2

HALL

JAZZ

CHURCH

GAME

MOVIE

LIVE

VDD

TEST

ON/OFF

MUTE

VOLUME

Select the source to be recorded by using the

input selector keys.

USB

AUX1

AUX2

Front panel

Start recording with the recording software on the

computer.

Start playing the input source.

Playing the recorded result via this unit

Press the USB input selector key, and play the recorded

result on the computer.

Notes

● If the number of USB channels is set to six, recording cannot

be made via the USB connection. Reset the number of USB

channels to two or four.

● To record digital input signals with a 48 kHz sampling

frequency, the frequency of the input signals must be 48 kHz.

● To record sound signals received at an analog or digital input

of the sound card etc., and not via the USB connection, select

the corresponding device, such as "Sound Card", from

"Preferred device" of "Recording" (or "Sound Recording")

on the computer.

● The sampling frequency and resolution of signals recordable

on the computer differ from operating systems. You can refer

to the following Yamaha website for details about the related

information.

http://www.yamaha.co.jp/audio/

USB

AUX1

AUX2

Remote control