Yamaha DSP -A780 운영 매뉴얼 - 페이지 14

{카테고리_이름} Yamaha DSP -A780에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DSP -A780 42 페이지. Digital sound field processing amplifier

CONNECTING SPEAKER SYSTEMS

Connect the SPEAKERS terminals to your speakers with wire of

the proper gauge, cut as short as possible. If the connections are

faulty, no sound will be heard from the speakers. Make sure that the

polarity of the speaker wires is correct, that is, + and – markings are

observed. If these wires are reversed, the sound will be unnatural

and will lack bass. Do not let the bare speaker wires touch each

other or any other metal part as this could damage this unit and/or

speakers.

NOTE: Use speakers with the specified impedance shown on the

rear of this unit.

For connecting to the MAIN and CENTER SPEAKERS terminals.

NOTE: Banana Plug connections are also possible (except for

Scandinavian models). Simply insert the Banana Plug connector into

the corresponding terminal.

Red: positive (+)

Black: negative (–)

Unscrew the knob.

Insert the bare wire.

[Remove approx. 5mm (1/4")

insulation from the speaker

wires.]

Tighten the knob and

secure the wire.

For connecting to the REAR SPEAKERS terminals.

Red: positive (+)

Black: negative (–)

Press down the tab.

Insert the bare wire.

[Remove approx. 5mm (1/4")

insulation from the speaker

wires.]

Press up the tab and secure

the wire.