Yamaha DSP -A780 운영 매뉴얼 - 페이지 27

{카테고리_이름} Yamaha DSP -A780에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DSP -A780 42 페이지. Digital sound field processing amplifier

2-2. RECORDING A SOURCE TO AUDIO/VIDEO TAPE

(OR DUBBING FROM A TAPE TO ANOTHER)

To record an input source to be played

1. Press the REC OUT switch (so that "REC OUT ... " appears on the

display and the monitor screen).

2. Within 5 seconds after the REC OUT switch is pressed, select the

"SOURCE" position with the input selector switch (so that "REC

OUT SOURCE" appears on the display panel and the monitor

screen).

REC OUT SOURCE

Front panel

3. Press the REC OUT switch (so that the indicator corresponding

to the selected source to be recorded stops flashing).

* The same result will be gained after 5 seconds automatically

without any operation.

4. Select an input source to be played (and to be recorded).

(See page 24 for the method of input source selection.)

Front panel

5. Play the source.

6. Set the tape deck or VCR used for recording to the recording

mode.

Adjust the recording level on the tape deck or VCR.

NOTE: To record picture from a video source and sound from

another audio source, in step 4, first select a video source with an

input selector key on the front panel, and then select an audio source

with the input selector keys on the remote control unit.

Remote Control