Yamaha DSP-A3090 연결 매뉴얼 - 페이지 8
{카테고리_이름} Yamaha DSP-A3090에 대한 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DSP-A3090 8 페이지. Owner's manual
페이지 인쇄Settings Of Switches On The Rear Panel
FRONT
MAIN
MIX
LEVEL
PAL NTSC
ON OFF
—I0dB 0dB
5ch 7ch
Connecting External Power Amplifier(s)
If you wish to use an external power amplifier to drive speakers for any channel, connect the power amplifier to
the corresponding line-level output jacks of this unit.
Main Speakers
L
MAIN
LEVEL
—I0dB 0dB
Center Speaker
MAIN LEVEL Switch
COUPLER
Normally set to "0 dB". If desired, you can decrease the main-
channel output level at the MAIN speaker terminals by 10 dB by
setting this switch to "–10 dB".
FRONT MIX Switch
Set to "OFF (7ch)" when setting up a full 7 or 6 speaker system,
or to "ON (5ch)" when setting up a 5 or 4 speaker system.
PRE
MAIN
OUT
IN
MAIN CH
PAL/NTSC Switch (General Model Only)
Set this switch to the position corresponding to the video
format that your video equipment employs.
R
Power Amplifier
8 MIN./SPEAKER
COUPLER
MONO
SPLIT
PRE
MAIN
OUT
IN
SUB
OUT
IN
MAIN CH
CENTER
WOOFER
Monaural
Power
Amplifier
Center Speaker
Front Effect Speakers
L
8 MIN./SPEAKER
FRONT
REAR
EFFECT
Monaural
Power
Amplifier
R
Power Amplifier
Power Amplifier
L
Rear Effect Speakers
R
5