Yamaha DSP-A970 운영 매뉴얼 - 페이지 18

{카테고리_이름} Yamaha DSP-A970에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DSP-A970 48 페이지. Digital sound field processing amplifier

CONNECTING THE EFFECT SPEAKERS TO THIS

UNIT

Connect the FRONT effect speakers to the FRONT effect

speaker output terminals of this unit.

If the FRONT effect speakers are not used, the FRONT MIX

switch should be set to "ON".

Connect the REAR effect speakers to the REAR effect speaker

output terminals of this unit.

NOTE: The speaker connections above are fine for most

applications. If for some reason, however, you wish to use an external

power amp for any or all of the effect channels, connect the line level

output jack(s) for each channel to the INPUT jacks of the external

amp and connect the corresponding speaker pair to the speaker

terminals of the external amp.

NOTE: If the pin plug is inserted in the FRONT/REAR EFFECT out

jacks, the speaker output from the built-in amplifier will be cut off.

Front effect

speaker

This unit

Rear effect

speaker

Front effect

speaker

Rear effect

speaker