Yamaha T5n 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Yamaha T5n에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha T5n 20 페이지. Yamaha power amplifier owner's manual
Yamaha T5n에 대해서도 마찬가지입니다: 소유자 매뉴얼 (19 페이지), 소유자 매뉴얼 (15 페이지), 소유자 매뉴얼 (19 페이지)

페이지 인쇄

1. Specifications

Wiring

Turn off the POWER switch before connecting external devices to the ampliﬁer.

■

Using a Euroblock connector

1. If the wire insertion ports are closed, turn the screws on

top of the connector counterclockwise to open the ports.

2. Insert the wires into the appropriate ports, following the

indication of the pole on the input terminal, and turn the

screws on top of the connector clockwise to ﬁx the

wires.

3. Attach the Euroblock connector to the input terminal on

the ampliﬁer.

■

Speaker Connection

● 5-way binding post

1. Remove the cover attachment screws and remove the

protective cover from the speaker terminals.

2. Remove about 15mm of insulation from the end of each

speaker cable, and pass the bare wire through the holes

in the appropriate speaker terminals. Tighten the termi-

nals to securely clamp the wires.

Refer to page 8 for speaker polarities.

Be sure that the bare wire ends do not jut out from the ter-

minals and touch the chassis. The illustration on the right

shows how the cable should look when correctly attached.

3. Reattach the protective cover over the speaker termi-

nals.

● Speakon connector

Insert the Neutrik NL4 plugs into the Speakon connector

on the rear of the ampliﬁer, and turn clockwise to lock.

CHANNEL

STEREO or PARALLEL

Neutrik

Ampliﬁer

A+

1–

A–

B+

2–

B–

T5n/T4n/T3n Owner's Manual

BRIDGE

Neutrik

Ampliﬁer

1–

–

2–

Speaker

cable

Bare wire

Neutrik NL4 plugs

CHANNEL

Neutrik

Ampliﬁer

B+

1–

B–

Use a screwdriver

to ﬁx the wires.

–

Screw

* Actual size

Chassis