Yamaha THR5 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Yamaha THR5에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha THR5 23 페이지. Thr series
Yamaha THR5에 대해서도 마찬가지입니다: 소유자 매뉴얼 (21 페이지), 소유자 매뉴얼 (22 페이지), 매뉴얼 (14 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (5 페이지)

Yamaha THR5 소유자 매뉴얼
Names And Functions
Rotate the knob clockwise to increase the
amount of each effect.
* Rotate the knob fully to the left to set the effect
OFF.
!2 DLY/REV
On the THR10/10X, or THR5, this selects one
of the four different effects; DELAY (delay),
DLY/REV (delay/reverb), SPRING (spring
reverb), and HALL (hall reverb).
On the THR10C, this selects one of the four
different effects; TAPE ECHO, ECHO/REV
(tape echo/reverb), SPRING (spring reverb),
and HALL (hall reverb).
On the THR5A, this selects one of the three
different effects; DELAY (delay), DLY/REV
(delay/reverb), and HALL (hall reverb).
Rotate the knob clockwise to increase the
amount of each effect.
* Rotate the knob fully to the left to set the effect
OFF.
* When DELAY or DLY/REV is selected, the TAP/
TUNER e button can be used to set the delay
time freely.
!3 GUITAR OUTPUT (THR10/10C/10X Only)
Adjusts the overall volume of the guitar
sound.
* This knob's setting has no effect on the signal
delivered by the USB @0 output.
!4 VOLUME (THR5/5A only)
Adjusts the overall volume of the guitar
sound.
* This knob's setting has no effect on the signal
delivered by the USB @0 output.
!5 USB/AUX OUTPUT (THR10/10C/10X only)
Adjusts the audio playback volume for audio
from the computer connected to the USB @0
jack or an audio device connected to the AUX
!8 jack.
12
!6 INPUT
This jack is used to connect a guitar to the
unit.
!7 PHONES
This a standard phone jack used to connect a
pair of stereo headphones to the unit. It can
also be used as a line out jack.
* Main speaker sound is muted when a connector is
inserted into the PHONES jack.
!8 AUX
This is a stereo mini phone jack used for
audio input from an external device such as
an MP3 player, etc.
* The signal received by the AUX input is not sent
to the USB @0 output.
!9 USER MEMORY (THR10/10C/10X Only)
Saves up to five sets of amp section control-
ler settings (GAIN, MASTER, BASS, MIDDLE,
TREBLE, EFFECT, DLY/REV). Press and
hold the number of the switch you want to
save your settings to (about 2 seconds).
The save operation is complete when the
memory number for the switch being pushed
appears in the LED display. Press one of the
numbered switches (less than 2 seconds) to
recall the saved settings.