Yamaha THR5 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Yamaha THR5에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha THR5 23 페이지. Thr series
Yamaha THR5에 대해서도 마찬가지입니다: 소유자 매뉴얼 (21 페이지), 소유자 매뉴얼 (22 페이지), 매뉴얼 (14 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (5 페이지)

페이지 인쇄

(Power Switch)

This is the unit's power switch.

When the power is ON, the lamp corre-

sponding to the selected amp type and the

Power Lamp in the speaker cabinet light.

* The Power Lamp in the speaker cabinet can be

switched ON or OFF using the THR Editor. (page 18).

w LED Display

Indicates each of the THR's settings and con-

ditions.

e TAP/TUNER

n Tuner Function

Holding the switch for 1 second engages the

tuner function and lights the

tors.

The tuner is calibrate to A4=440Hz. Tune the

guitar until the pitch that you want to tune to

appears in the display.

Tuning is complete when only the

center of the

Pitch is low

In tune

Press the TAP/TUNER switch (less than one

second) to turn OFF the tuner function.

* When the tuner function is set ON, guitar sound to

the main speakers, PHONES, and USB is muted. In-

put received from the AUX and USB jacks is output.

n Tap Tempo Function

When a DLY or DLY/REV effect is selected

with the DLY/REV !2 control, the tempo of

the delay can be set by tapping (more than

twice) on the switch.

n Extended Stereo Setting

Hold the switch for more than three seconds

to switch the Extended Stereo* function ON/

OFF.

indica-

in the

display is visible.

Pitch is high

ON: "#" on LED w is off (default setting).

OFF: "#" on LED w is lit.

* Extended Stereo: The Extended Stereo function

produces a much wider stereo field. Extended

Stereo effects the USB/AUX inputs as well as gui-

tar sounds with DLY/REV or HALL effects applied.

* The Extended Stereo setting (ON/OFF) is saved

when the power is switched OFF.

r AMP (THR10/10C/10X and THR5 only)

Selects the amp type. The lamp for the corre-

sponding amp type lights.

* When the power is switched ON, the most recent

amp type is selected.

n Tips on Creating Sound

THR's GAIN t and MASTER y controls

work in the same way as the preamp and

master controls on a tube amp. The GAIN t

control provides preamp gain and distortion

while the MASTER y control affects power

amp level. The response of the MASTER y

control differs depending on the amp model

used but it affects volume, gain and power

amp compression.Using the GUITAR OUT-

PUT !3 control you can use the amp's GAIN

t and MASTER y controls to set your tone

at any level.

THR utilizes a newly designed amp-modeling

technology using Yamaha's Virtual Circuitry

Modeling (VCM) technology. VCM gives

THR the power to model real amps incred-

ibly accurately, with each control working

and responding exactly as it does on the real

thing.

Amp Type Descriptions: THR10/THR5

CLEAN:

Rich, clean tones from a 6L6 power

section with gentle breakup for incredible

jazz, blues and country sounds.

* When the BASS, MIDDLE, and TREBLE controls

are all set to 0, there is no guitar sound output.

Names And Functions