Yamaha 6490 - NS Left / Right CH Speakers 소유자 매뉴얼 - 페이지 2

{카테고리_이름} Yamaha 6490 - NS Left / Right CH Speakers에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha 6490 - NS Left / Right CH Speakers 3 페이지. Owners manual

페이지 인쇄

Yamaha 6490 - NS Left / Right CH Speakers 소유자 매뉴얼

CONNECTIONS TO YOUR AMPLIFIER

Before making connections, make sure that the amplifier is switched off.

Connections

• Connect the input terminals at the rear of the speakers to the speaker output terminals of the amplifier (or receiver) with

the provided speaker cables.

• Connect the (+) terminals on both the amplifier (or receiver) and the speakers using one side of the cable. Connect the

(–) terminals on both components using the other side of the cable.

• Connect one speaker to the left (marked L) terminals of the amplifier (or receiver) , and another speaker to the right

(marked R) terminals, making sure not to reverse the polarity (+, –). If one speaker is connected with reversed polarity,

the sound will be unnatural and lack bass.

How to Connect:

[U.S.A. Model]

Black (-)

–

Speaker (R)

Speakers output

terminals of the

amplifier

Amplifier or

Receiver

1 Remove the insulation coating at the extremity of each

speaker cable by twisting the coating off.

2 Press and hold the terminal's tab, as shown in the

figure.

3 Release your finger from the tab to allow it to lock

securely on the cable's wire end.

4 Test the firmness of the connection by pulling lightly

on the cable at the terminal.

Note

Do not let the bare speaker wires touch each other as this could

damage the speaker or the amplifier, or both of them.

Red (+)

Press

Speaker (L)

SPEAKERS

–

[Europe, China and General models]

Loosen