Yamaha ATS-1070 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Yamaha ATS-1070에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha ATS-1070 2 페이지. Front surround system
Yamaha ATS-1070에 대해서도 마찬가지입니다: 소유자 매뉴얼 (42 페이지)
페이지 인쇄
Connection
TV
When only a TV will be connected to the sound bar, connect the two using one of the two methods shown below. An optical digital audio cable and an
analog audio cable (RCA plug (L/R)-3.5 mm mini plug cable) are supplied with the sound bar.
1st choice
TV
SUBWOOFER
ANALOG
UPDATE
OUT
ONLY
AC IN
TV and a set-top box, or BD/DVD player
When a TV and a playback device will be connected to the sound bar,
connect the three as shown below. HDMI cables are not supplied with the
sound bar. Use third-party HDMI cables.
Cable, satellite or
network set-top box, or
BD/DVD player
HDMI OUTPUT
SUBWOOFER
ANALOG
OUT
UPDATE
ONLY
AC IN
When a TV that supports Audio Return Channel (ARC) will be
connected, the sound bar can only play audio from the TV when it is
connected as shown above.
What is Audio Return Channel (ARC)?
In order for the sound bar to play audio from a TV, the TV must usually
be connected to the sound bar via an audio cable as well as an HDMI
cable. If, however, the TV supports Audio Return Channel (ARC), TV
audio signals can be input to the sound bar via the HDMI cable that
outputs video signals from the sound bar to the TV.
HDMI INPUT
OPTICAL
1
2
3
OUTPUT
1. Remove
2. Check the
the cap
direction of
the plug
TV
IN
OUT(ARC)
SUBWOOFER
ANALOG
TV
OUT
UPDATE
IN
OUT(ARC)
ONLY
TV
HDMI INPUT
OPTICAL
1
2
OUTPUT
TV
IN
OUT(ARC)
SUBWOOFER
ANALOG
TV
UPDATE
OUT
ONLY
IN
OUT(ARC)
2nd choice
TV
UPDATE
ONLY
Power cable
After all connections are complete, connect the supplied power cable to
the AC IN jack on the sound bar and plug the power cable into an AC wall
outlet.
3
Watching TV
1
Press z (power) key on the remote control to turn on
the sound bar.
2
Press the TV key on the remote control to select TV as
the input source.
NOTE
• Press the ANALOG key on the remote control if the sound bar and TV are
connected as shown with "2nd choice" above. Press the HDMI key on the remote
control to watch a TV program received via set-top box.
3
Select the desired input source on the TV.
4
Press the VOLUME (+/–) keys on the remote control to
adjust the volume.
For details, refer to the Owner's Manual.
... and more features!
– "HOME THEATER CONTROLLER" sound bar control app
– Bluetooth connection
– Clear voice
The sound bar is equipped with a number of other functions not
described in the Quick Start Guide. See the Owner's Manual for details.
— 2 —
ANALOG
OUTPUT
1
L
R
SUBWOOFER
ANALOG
TV
OUT
SUBWOOFER
ANALOG
TV
OUT
UPDATE
AC IN
ONLY
AC IN
SUBWOOFER
ANALOG
TV
UPDATE
OUT
ONLY
AC IN
HDMI INPUT
2
3
IN
OUT(ARC)
IN
OUT(ARC)
To an AC wall outlet
IN
OUT(ARC)