Yamaha ATS-2070 업데이트 매뉴얼 - 페이지 4

{카테고리_이름} Yamaha ATS-2070에 대한 업데이트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha ATS-2070 7 페이지. Front surround system
Yamaha ATS-2070에 대해서도 마찬가지입니다: 소유자 매뉴얼 (42 페이지), 소유자 매뉴얼 (46 페이지), 서비스 매뉴얼 (50 페이지)

페이지 인쇄
Yamaha ATS-2070 업데이트 매뉴얼
5
Touch and hold
least 3 seconds.
The firmware update begins. The indicators will glow as
shown below while the firmware is being updated.
Running display (glow in succession)
The indicators will flash as shown below when the firmware
update has been successfully completed.
If indicators flash differently than shown above, or fail to glow
or flash at all, see "Troubleshooting" (p. 6 and 7).
and
together for at
Glows
Flash
NOTICE
Do not unplug the power cable or disconnect the USB flash
drive until the following procedures are completed.
6
Touch
when the firmware update is
complete.
The unit will turn off.
7
Disconnect the USB flash drive.
The firmware update has been completed.
4