Yamaha ATS-2090 업데이트 매뉴얼 - 페이지 4

{카테고리_이름} Yamaha ATS-2090에 대한 업데이트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha ATS-2090 7 페이지.
Yamaha ATS-2090에 대해서도 마찬가지입니다: 매뉴얼 (3 페이지)

2. Updating the unit's firmware

Update the firmware of the unit.

1. Turn off the unit.

2. Unplug the power cable from the AC wall outlet.

3. Connect the USB flash drive to the UPDATE ONLY jack on the unit.

4. Plug the power cable into an AC wall outlet.

5. Touch and hold

The firmware update begins. The indicators will glow as shown below while the firmware is being updated.

The indicators will flash as shown below when the firmware update has been successfully completed.

If indicators flash differently than shown above, or fail to glow or flash at all, see Troubleshooting.

Notice

• Do not unplug the power cable or disconnect the USB flash drive until the following procedures are

completed.

6. Touch

(power) when the firmware update is complete.

7. Disconnect the USB flash drive.

The firmware update has been completed.

2 | YAS-209 / ATS-2090 Update Guide

USB flash drive containing

the firmware data file

(volume -) and

(power) together for at least 3 seconds.

Running display

Flashes

Flash