Yamaha AW390 - NS Speaker - 40 Watt 사용자 설명서 - 페이지 6
{카테고리_이름} Yamaha AW390 - NS Speaker - 40 Watt에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha AW390 - NS Speaker - 40 Watt 11 페이지. Indoor/outdoor speaker system
페이지 인쇄
CONNECTIONS TO YOUR AMPLIFIER
Before making connections, make sure that the amplifier is switched off.
Red (+)
Black (-)
Speaker (R)
\\
/1
/1
i0\
/)~!~
r;;;:,(
/(ti\
1: :J
:l
\;1//-
+\ Iii)
+\\'ii)
/j'
~~;.
~~f;'
<II>
\\
<II>
\\
CONNECTIONS
• Connect the input terminals at the rear of the speakers to
the speaker output terminals of the amplifier (or receiver)
with the speaker cables.
• One side of the speaker cable is red and the other side is
black. Connect the (+) terminals on the amplifier (or
receiver) and speakers using the red side. Connect the (-)
terminals on both components using the black side of the
cable.
• Connect each speaker making sure not to reverse the
polarity (+, -). If the speaker is connected with reversed
polarity, the sound will be unnatural and lack bass.
How to Connect
CD
Remove the insulation coating at the extremity of each
speaker cable by twisting the coating off.
@ Press down and hold the terminal's tab.
®
Insert the bare wire into the terminal hole.
@)
Release your finger from the tab to allow it to lock
securely on the bare wire end.
®
Test the firmness of the connection by pulling lightly on
the cord at the terminal.
Note
Do not let the bare speaker wires touch each other as this
could damage the speaker or amplifier, or both.
Amplifier or
Receiver
Speakers output
terminals of the
amplifier
6