Ecoplus ZR9W-250V 사용 설명서 - 페이지 16

{카테고리_이름} Ecoplus ZR9W-250V에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ecoplus ZR9W-250V 20 페이지. Domestic hot water unit, air source heat pump with external coil

페이지 인쇄

1. Technical Data

4.INSTALLATION INSTRUCTION

Please pay attention to following information before installation

1). Applied working temp of heat pump -7 ~ 43

2). Check whether the power supply and wire meet the standard of the unit.

3). Do not alter the power wiring or socket. Do not change the GND connection of the

system.

4). Do not insert hands or object into the vent of heat pump, it may cause dangerous or

damaged.

5).Ensure that water tank is full filled with water before turn the heat pump on.

6).The Maximum temp of outlet water can up to 60

some water when using water.

7). Heat pump should be checked and maintained once a time every year by a qualified

technical people. And all power should be disconnected when servicing.

8).The magnesium stick should be replaced 1 or 1.5 year according to the water quality.

9).Please provide serial No. on the nameplate, when asking for after- sale service.

Installation Instruction

1). The air inlet and outlet should be free from obstacles and strong wind.

2). The bearing surface should be flat, able to bear weight of the unit and suitable for

installing the unit vertically without increasing noise or vibration.

3). No flammable gas is leaked nearby.

4). It is convenient for piping and wiring.

5). This heat pump unit can be installed at Garden, Garage , Balcony or other place,

but make sure there is enough space for proper installation and maintenance. Find

Reference installation pic in below.

, strongly recommend to mix up

STATUS: Heating

Outlet water temp. 31℃

Target temp.

57℃

24/06/2011

09:28