Yamaha CMA3SW 소유자 매뉴얼 - 페이지 6
{카테고리_이름} Yamaha CMA3SW에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha CMA3SW 24 페이지.
Yamaha CMA3SW에 대해서도 마찬가지입니다: 소유자 매뉴얼 (36 페이지)
페이지 인쇄
Connections
Connect the power amplifier and the VXS3S
Connect the OUTPUT of the power amplifier to the INPUT of the
subwoofer.
Power amplifier
INPUT
＋
－
6
VXS3SB / VXS3SW / CMA3SB / CMA3SW Owner's Manual
INPUT
Set the line voltage/impedance and power
Select the line voltage/impedance (100V/70V/8Ω) and power tap for
100V/70V line distributed system by rotating the tap selector switch on
the front side of the speaker with a flat-blade screwdriver.
NOTICE
• When connecting speakers with high impedence, select settings according to the
above selector switch inscriptions according to the number of satelite speaker
connections (NONE/×2/×4) and output (W).
Make sure that the input total of each speaker does not exceed the rated output of the
power amplifier.
• Do not set the tap selector switch to the "X" position.
• When using a low impedance connection, set the tap selector switch to the "8Ω"
position.
If the setting is incorrect, it may cause malfunction of the speaker and amplifier.
• Make sure the amplifier is switched off before operating the tap selector switch.
Satellite speakers (NONE)
Satellite speakers (×4)
Satellite speakers (×2)