Yamaha DXR8 소유자 매뉴얼 - 페이지 5

{카테고리_이름} Yamaha DXR8에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DXR8 22 페이지. Dxr and dxs series powered speakers and subwoofers
Yamaha DXR8에 대해서도 마찬가지입니다: 소유자 매뉴얼 (22 페이지), 매뉴얼 (12 페이지), 소유자 매뉴얼 (22 페이지), (영어) 사용 설명서 (22 페이지), (영어) 사용 설명서 (22 페이지), (러시아어) (22 페이지)

페이지 인쇄

• When setting up the device, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the

power switch and disconnect the plug from the outlet. Even when the power

switch is turned off, electricity is still flowing to the product at the minimum

level. When you are not using the product for a long time, make sure to unplug

the power cord from the wall AC outlet.

• When transporting or moving the DXS15, DXS12, or DXR15, always use two or

more people. Attempting to lift the DXS15, DXS12, or DXR15, by yourself may

damage your back, result in other injury, or cause damage to the device itself.

• If you use the pole socket on the DXS15 to mount a satellite speaker, use a

speaker of 19.3kg (42.5lbs) or less in weight and 60.1cm (23-5/8") or less in

height. If you use the pole socket on the DXS12 to mount a satellite speaker, use

a speaker of 14.6kg (32.2lbs) or less in weight and 50.2cm (19-6/8") or less in

height. Also, use a speaker pole no longer than 120cm (47.2") with an outer

diameter of 35mm (1-3/8").

• Always consult qualified Yamaha service personnel if the device installation

requires construction work, and make sure to observe the following precautions.

- Choose mounting hardware and an installation location that can support the

weight of the device.

- Avoid locations that are exposed to constant vibration.

- Use the required tools to install the device.

- Inspect the device periodically.

Connections

• Before connecting the device to other devices, turn off the power for all devices.

Before turning the power on or off for all devices, set all volume levels to

minimum.

Maintenance

• Remove the power plug from the AC outlet when cleaning the device.

XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-).

Interference From Cell Phones

Using a cell phone near the speaker system can induce noise. If this occurs, move the cell phone further away from the speaker system.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the device, or data that is lost or destroyed.

Always turn the power off when the device is not in use.

The performance of components with moving contacts, such as switches, volume controls, and connectors, deteriorates over time. Consult qualified Yamaha service

personnel about replacing defective components.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

• The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument.

• Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at

any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.

Handling caution

• Do not insert your fingers or hands in any gaps or openings on the device

(panel).

• Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any

gaps or openings on the device (panel) If this happens, turn off the power

immediately and unplug the power cord from the AC outlet. Then have the

device inspected by qualified Yamaha service personnel.

• Do not rest your weight on the device or place heavy objects on it, and avoid use

excessive force on the buttons, switches or connectors.

• Do not use the device for a long period of time at a high or uncomfortable

volume level, since this can cause permanent hearing loss. If you experience

any hearing loss or ringing in the ears, consult a physician.

• Do not operate the device if the sound is distorting. Prolonged use in this

condition could cause overheating and result in fire.

• Do not pull the cables connected to the microphones, etc.

2/2

PA_en_1

DXR15/DXR12/DXR10/DXR8/DXS15/DXS12 Owner's Manual