Yamaha DXS12 mkll 소유자 매뉴얼 - 페이지 13
{카테고리_이름} Yamaha DXS12 mkll에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DXS12 mkll 22 페이지. Dxr and dxs series powered speakers and subwoofers
Yamaha DXS12 mkll에 대해서도 마찬가지입니다: 소유자 매뉴얼 (22 페이지), 매뉴얼 (12 페이지), 소유자 매뉴얼 (2 페이지), 소유자 매뉴얼 (2 페이지), (영어) 사용 설명서 (22 페이지), (영어) 사용 설명서 (22 페이지), (러시아어) (22 페이지)
페이지 인쇄
References
References
Specifications
General
System Type
2-way, Bi-amp Powered Speaker, Bass-reflex Type
Frequency Range (-10dB)
49Hz – 20kHz
Coverage Angle
H90° x V60° Constant Directivity Horn
Crossover Type
FIR-X tuning
Crossover Frequency
2.1kHz
Measured Maximum SPL (peak)
133dB SPL
IEC noise@1m
Transducer
LF
Diameter
15" Cone
Voice coil
2.5"
Magnet
Ferrite
HF
Diaphragm
1.4"
Type
1" Throat Compression Driver
Magnet
Ferrite
Enclosure
Material, Finish, Color
ABS, Matte Black
Floor Monitor Angle
50° Symmetrical
Dimensions
445×700×380 mm
(WxHxD, with rubber feet)
(17-1/2" x 27-1/2"
x 15")
Net Weight
22.5kg (49.6lbs)
Handles
Aluminium die-cast (Side x 2)
Pole Socket
35mm with 2-way feature (0 or 7 degree)
Rigging points
Top x 2, Rear x 1
(Fits for M10 x 18mm eyebolts)
Optional Accessory (U-bracket)
UB-DXR15
Amplifier
Amplifier Type
Class-D
*1
Power Rating
Dynamic
1100W (LF: 950W, HF: 150W)
Continuous
700W (LF: 600W, HF: 100W)
Cooling
Fan cooling, 4 speeds
AD/DA
24bit 48kHz sampling
Signal Processing
48bit (Accumulator: 76bit)
HPF/LPF
OFF, 100, 120Hz 24dB/oct HPF
DSP preset
D-CONTOUR: FOH/MAIN, MONITOR, OFF
Protection
Speaker
Clip limiting, Integral Power Protection, DC-fault
Amplifier
Thermal, Output over current
Power supply
Thermal, Output over voltage, Output over current
Connectors
Input
INPUT1: XLR3-31 x 1, INPUT2: Phone x 2 (Unbalanced),
INPUT3: RCA PIN x 2 (Unbalanced)
Output
THRU: XLR3-32 x 1 (Parallel with INPUT1), LINK OUT: XLR x1
Input
INPUT1
LINE: 12kΩ, MIC: 8kΩ
Impedance
INPUT2, 3
L, R: 40kΩ, MONO: 20kΩ
Input Sensitivity
INPUT1
LINE: +1dBu, MIC: -32dBu
(LEVEL:
INPUT2, 3
-13dBu
Maximum)
80
DXR15/DXR12/DXR10/DXR8/DXS15/DXS12 Owner's Manual
DXR15
DXR12
52Hz – 20kHz
™
(Linear Phase FIR Filter)
2.1kHz
132dB SPL
DXR15
DXR12
12" Cone
2.5"
DXR15
DXR12
50° Symmetrical
362×601×350 mm
(14-1/4" x 23-5/8"
x 13-3/4")
19.3kg (42.5lbs)
UB-DXR12
DXR15
DXR12
DXR10
DXR8
56Hz – 20kHz
57Hz – 20kHz
2.3kHz
2.4kHz
131dB SPL
129dB SPL
DXR10
DXR8
10" Cone
8" Cone
2"
2"
DXR10
DXR8
50°
–
305×502×310 mm
280×458×280 mm
(12" x 19-3/4"
(11" x 18" x 11")
x 12-1/4")
14.6kg (32.2lbs)
13.5kg (29.8lbs)
Aluminium die-cast (Top x 1)
Top x 2, Rear x 1
(Fits for M8 x 15mm eyebolts)
UB-DXR10
UB-DXR8
DXR10
DXR8
DXS15
DXS12
Powered Subwoofer, Band-pass Type
45Hz – 160Hz
47Hz – 160Hz
–
–
–
132dB SPL
131dB SPL
DXS15
DXS12
15" Cone
12" Cone
2.5"
2.5"
–
–
–
DXS15
DXS12
Wood, Paint, Black
–
478×618×624 mm
397×563×594 mm
(18-7/8" x 24-3/8"
(15-5/8" x 22-1/8"
x 24-1/2")
x 23-3/8")
38.0kg (83.8lbs)
33.0kg (72.8lbs)
Metal (Side x 2)
35mm (Top)
–
–
DXS15
DXS12
Class-D
950W
600W
80, 100, 120Hz 24dB/oct LPF
D-XSUB: BOOST, XTENDED-LF, OFF
INPUT: XLR3-31 x 2
THRU: XLR3-32 x 2 (Parallel with INPUT)
10kΩ
–
+1dBu
–