Yamaha DXS15XLF-D 소유자 매뉴얼 - 페이지 10
{카테고리_이름} Yamaha DXS15XLF-D에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DXS15XLF-D 31 페이지. Powered loudspeakers/subwoofer
Yamaha DXS15XLF-D에 대해서도 마찬가지입니다: 소유자 매뉴얼 (31 페이지), 소유자 매뉴얼 (31 페이지), 소유자 매뉴얼 (31 페이지)
페이지 인쇄
HOME Screen
The HOME screen appears when the power switch is turned on.
Full range
Example (Dante models)
q
w
e
u
Display
q UNIT ID, LABEL
Dante model
w Input Meter
("ANA" appears on DANTE
models.)
e Input Meter (DNT)
Dante model
r MASTER Level
t SP Output Meter
y Protection
(THERMAL, MUTED)
u PRESET
i HPF
Full range
LPF
Subwoofer
o D-CONTOUR
Full range
D-XSUB
Subwoofer
!0 EQ
!1 DELAY
!2 CARDIOID
Subwoofer
!3 ROUTER
!4 UTILITY
For details, refer to the Reference Manual on the Yamaha Pro Audio global website.
http://www.yamahaproaudio.com/
10
r t
i
o
!0
!1
!3
!4
y
Shows the UNIT ID and label that are used for Dante. Allows you to go to the DANTE SETUP screen to
configure and display Dante settings.
Shows the input level of the analog signal.
Shows the input level of the Dante signal.
Displays and sets the output level (Unit: dB).
Shows the output level.
Appears when the protection function is active. "THERMAL" is shown when a high temperature is
detected in the amplifier (and the output level is reduced). If the conditions of the usage environment
become even worse, MUTED is displayed (and the output signal is muted).
Shows the preset No. and title of the currently selected preset. Allows you to store, recall, and edit sound-
related settings. E symbol is displayed when you edit a parameter.
Allows you to configure and display the high-pass filter frequency settings.
Allows you to configure and display the low-pass filter frequency and POLARITY settings.
when the polarity is set to INVERTED.
Allows you to configure and display the D-CONTOUR mode settings.
Allows you to configure and display the D-XSUB mode settings.
Shows if the equalizer is ON or OFF. Allows you to configure the EQ settings while checking the frequency
characteristics.
Allows you to configure and display delay settings.
Allows you to configure and display the cardioid mode settings.
Allows you to configure the routing of the audio signal.
Allows you to configure and display the following settings.
- PANEL SETUP: Configures display brightness, contrast, and display/indicator auto off settings.
- PANEL LOCK: Configures misoperation prevention setting, saves/loads PIN CODE.
- DEVICE BACKUP: Saves/loads configuration data.
Dante model
- DANTE SETUP
- NETWORK
Dante model
- DEVICE INFORMATION: Displays the status and information unique to this product.
- INITIALIZE: Performs initialization.
- LOG: Displays recorded logs. Saves logs to USB flash drive.
- UPDATE FIRMWARE: Update the firmware for the device, and the Dante module.
Subwoofer
Example (Dante models)
q
w
e
u
Description
: Configures and displays Dante settings.
: Configures and displays network settings.
Full range
Subwoofer
r t
i
o
!0
!1
!2
!3
!4
y
is displayed