Calian IntraGrain Bin-Sense 사용자 설명서 - 페이지 15
{카테고리_이름} Calian IntraGrain Bin-Sense에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Calian IntraGrain Bin-Sense 17 페이지. Remote unit
페이지 인쇄DIAGNOSTICS
LED DIAGNOSTICS
The diagnostic LED on the Remote unit circuit board flashes different patterns to give information about what
the device is connected to. Most of the information is related to what the unit detects on the sensor cable
interface.
The diagnostic LED will automatically start the flashing pattern shortly after powering on the Remote unit, and
once the Remote unit has finished scanning all the attached cables and accessories. The flashing pattern will
continue to repeat (skipping the channel number) until the Remote unit connects to a Master unit.
The diagnostic LED flashes different colors to convey different information. Red flashes indicate what
equipment is being scanned, and orange and green flashes indicate the number of items. The LED will flash red
first, and then orange and/or green. The process will repeat until all the information has been communicated.
LED FLASH SEQUENCE
Figure 5: Diagnostic LED Sequence
The diagnostic LED will only flash a specific number of red flashes if the corresponding number is not zero. For
example, if there are no moisture cables connected to the Master unit, the LED will not flash three red flashes. If
www.binsense.com
March 2022 Version 1.0
Page 13