Yamaha ESB-1090 소유자 매뉴얼 - 페이지 25
{카테고리_이름} Yamaha ESB-1090에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha ESB-1090 33 페이지. Front surround system
Yamaha ESB-1090에 대해서도 마찬가지입니다: 설치 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (40 페이지), 빠른 시작 매뉴얼 (8 페이지)
페이지 인쇄
Other functions
Operating the unit with the TV remote
control
The HDMI control function (a function that links this unit to a TV
connected with an HDMI cable) allows you to operate this unit with the
TV's remote control.
[Example]
• Turning on/off the power of the unit with the TV remote control
• Setting the input source of the audio signal with the TV remote control
• Set the speakers that output audio with the TV remote control
• Adjusting the volume of the speaker with the TV remote control
NOTE
Details of the functions vary depending on the type of TV and remote
control.
Note that the HDMI control function can be enabled/disabled by
following the procedure below.
1. Press the power button on the remote control to turn off the unit.
2. Press the buttons on the remote control in the following order.
"Press MUSIC button once."
>
"Press the mute button once."
>
"Press VOLUME (-) button twice."
The unit will turn on.
3. Press the power button on the remote control to turn off the unit.
4. Press and hold HDMI button on the remote control for at least 5
seconds.
The HDMI indicator lights up when the unit is enabled from disabled.
When going from enabled to disabled, none of the indicators will be
lit.
That's all for the procedure. When the switchover is complete, the unit will
turn on.
IMPORTANT
When the switchover is complete, the unit is in the mode deactivated
state. Follow the procedure described on page 16 to reconfigure the
mode.
NOTE
• When the HDMI control function is enabled, the standby power
consumption of the unit is higher than when it is disabled.
• When both the HDMI control function and the Bluetooth standby
function (described on page 28) are disabled, the STATUS indicator does
not light up even when the unit is turned off.
25