Yamaha ESB-1090 설치 매뉴얼 - 페이지 3

{카테고리_이름} Yamaha ESB-1090에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha ESB-1090 4 페이지. Front surround system
Yamaha ESB-1090에 대해서도 마찬가지입니다: 소유자 매뉴얼 (33 페이지), 빠른 시작 매뉴얼 (40 페이지), 빠른 시작 매뉴얼 (8 페이지)

페이지 인쇄

[Power Back Up]

You can enable or disable the power backup function (a function that allows the unit itself to record the status of

its power supply).

If the power plug is disconnected from the wall outlet, the unit will shutdown. The state of the power supply when

restarting the unit (with the power plug inserted into a wall outlet) depends on whether this function is enabled

or disabled, and in which mode the unit is in.

• When the power backup function is enabled

- (before shutdown) the unit is "on"

- (before shutdown) the unit is "off" (standby) → (regardless of mode) the unit will be "off" (standby) when

• When the power backup function is disabled

- The unit is in Conference mode → The unit is "on" when it is restarted (regardless of the unit's state before

- The unit is in Hotel mode

- The unit is in Education mode → The unit is "off" when it is restarted (regardless of the unit's state before

[Bluetooth Function]

You can enable or disable the Bluetooth® function.

[Bluetooth Name]

You can set the name of Bluetooth. 13 ASCII characters or less can be entered.

[Turn on Input]

You can set the input source of the audio signal when the unit is turned on.

[Network Control]

You can enable or disable the network control function (a function that allows you to remotely control the unit via

a wired network).

1-3. Click the [Create a Setup Text File] button.

A setup file is created and saved in the same folder as the setup file creation tool.

1-4. Save the setup file to a USB flash drive.

Please save only the created setup file in the USB flash drive.

→ (regardless of mode) the unit will be "on" when it restarts.

it restarts.

shutdown).

→ The unit is "off" when it is restarted (regardless of the unit's state before

shutdown).