Yamaha HS50M 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Yamaha HS50M에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha HS50M 17 페이지. Hs series powered monitor speaker
Yamaha HS50M에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지), 서비스 매뉴얼 (27 페이지)

페이지 인쇄

PLEASE READ CAREFULLY BEFORE PROCEEDING

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-

circuiting, damages, ﬁre or other hazards. These precautions include, but are not limited to, the following:

Power supply/Power cord

• Only use the voltage speciﬁed as correct for the device. The required voltage is printed on

the name plate of the device.

• Use only the included power cord.

• Do not place the power cord near heat sources such as heaters or radiators, and do not

excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a

position where anyone could walk on, trip over, or roll anything over it.

• Be sure to connect to an appropriate outlet with a protective grounding connection.

Improper grounding can result in electrical shock.

Do not open

• Do not open the device or attempt to disassemble the internal parts or modify them in any

way. The device contains no user-serviceable parts. If it should appear to be malfunctioning,

discontinue use immediately and have it inspected by qualiﬁed Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other

property. These precautions include, but are not limited to, the following:

Power supply/Power cord

• Remove the electric plug from the outlet when the device is not to be used for extended

periods of time, or during electrical storms.

• When removing the electric plug from the device or an outlet, always hold the plug itself and

not the cord. Pulling by the cord can damage it.

Location

• Before moving the device, remove all connected cables.

• When setting up the device, make sure that the AC outlet you are using is easily accessible.

If some trouble or malfunction occurs, immediately turn off the power switch and disconnect

the plug from the outlet.

• Do not use the device in a conﬁned, poorly-ventilated location. Make sure that there is

adequate space between the device and surrounding walls or other devices: at least 20cm at

the sides, 20cm behind and 20cm above. Inadequate ventilation can result in overheating,

possibly causing damage to the device(s), or even ﬁre.

• Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in

direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel

disﬁguration or damage to the internal components.

• Do not place the device in an unstable position where it might accidentally fall over.

XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-).

Even though this speaker system (HS50M, HS80M only) is magnetically shielded, you may need to move the speaker further away from the video monitor, if a nearby video monitor exhibits any

distortion or unnatural color shift.

Interference From Cell Phones

Using a cell phone near the speaker system can induce noise. If this occurs, move the cell phone further away from the speaker system.

Yamaha cannot be held responsible for damage caused by improper use or modiﬁcations to the device.

Always turn the power off when the device is not in use.

The performance of components with moving contacts, such as switches, volume controls, and connectors, deteriorates over time. Consult qualiﬁed Yamaha service personnel about replacing

defective components.

• Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of the product during operation.

• Company names and product names used in this Owner's Manual are trademarks or registered trademarks of their respective owners.

• Speciﬁcations and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or speciﬁcations at any time without prior notice. Since speciﬁcations,

equipment or options may not be the same in every locale, please check with your Yamaha dealer.

PRECAUTIONS

* Please keep this manual in a safe place for future reference.

Water warning

• Do not expose the device to rain, use it near water or in damp or wet conditions, or place

containers on it containing liquids which might spill into any openings.

• Never insert or remove an electric plug with wet hands.

If you notice any abnormality

• If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound

during use of the device, or if any unusual smells or smoke should appear to be caused by

it, immediately turn off the power switch, disconnect the electric plug from the outlet, and

have the device inspected by qualiﬁed Yamaha service personnel.

• If this device should be dropped or damaged, immediately turn off the power switch,

disconnect the electric plug from the outlet, and have the device inspected by qualiﬁed

Yamaha service personnel.

Connections

• Before connecting the device to other devices, turn off the power for all devices. Before

turning the power on or off for all devices, set all volume levels to minimum.

Handling caution

• When turning on the AC power in your audio system, always turn on the device LAST, to

avoid speaker damage. When turning the power off, the device should be turned off FIRST

for the same reason.

• Do not insert your ﬁngers or hands in any gaps or openings on the device (ports, etc.).

• Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any gaps or

openings on the device (ports, etc.) If this happens, turn off the power immediately and

unplug the power cord from the AC outlet. Then have the device inspected by qualiﬁed

Yamaha service personnel.

• Do not use the device for a long period of time at a high or uncomfortable volume level,

since this can cause permanent hearing loss. If you experience any hearing loss or ringing

in the ears, consult a physician.

• Do not operate the device if the sound is distorting. Prolonged use in this condition could

cause overheating and result in ﬁre.

• Do not rest your weight on the device or place heavy objects on it, and avoid use excessive

force on the buttons, switches or connectors.

(5)-4